View source for Pulse-width modulation

You do not have permission to edit this page, for the following reasons:

This IP address has been blocked from editing Wikipedia.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

The IP address or range 3.209.0.0/16 has been blocked by ‪Blablubbs‬ for the following reason(s):

The IP address that you are currently using has been blocked because it is believed to be a web host provider or colocation provider. To prevent abuse, web hosts and colocation providers may be blocked from editing Wikipedia.
You will not be able to edit Wikipedia using a web host or colocation provider because it hides your IP address, much like a proxy or VPN.
We recommend that you attempt to use another connection to edit. For example, if you use a proxy or VPN to connect to the internet, turn it off when editing Wikipedia. If you edit using a mobile connection, try using a Wi-Fi connection, and vice versa. If you are using a corporate internet connection, switch to a different Wi-Fi network. If you have a Wikipedia account, please log in.
If you do not have any other way to edit Wikipedia, you will need to request an IP block exemption.

How to appeal if you are confident that your connection does not use a colocation provider's IP address:
If you are confident that you are not using a web host, you may appeal this block by adding the following text on your talk page: {{unblock|reason=Caught by a colocation web host block but this host or IP is not a web host. My IP address is _______. Place any further information here. ~~~~}}. You must fill in the blank with your IP address for this block to be investigated. Your IP address can be determined here. Alternatively, if you wish to keep your IP address private you can use the unblock ticket request system. There are several reasons you might be editing using the IP address of a web host or colocation provider (such as if you are using VPN software or a business network); please use this method of appeal only if you think your IP address is in fact not a web host or colocation provider.

Administrators: The IP block exemption user right should only be applied to allow users to edit using web host in exceptional circumstances, and requests should usually be directed to the functionaries team via email. If you intend to give the IPBE user right, a CheckUser needs to take a look at the account. This can be requested most easily at SPI Quick Checkuser Requests. Unblocking an IP or IP range with this template is highly discouraged without at least contacting the blocking administrator.

This block will expire on 09:29, 23 December 2026. Your current IP address is 3.209.56.232.

Even when blocked, you will usually still be able to edit your user talk page, as well as email administrators and other editors.

For information on how to proceed, please read the FAQ for blocked users and the guideline on block appeals. The guide to appealing blocks may also be helpful.

Other useful links: Blocking policy · Help:I have been blocked
This IP address range has been globally blocked.
This does not affect your ability to read Wikipedia pages.
Most people who see this message have done nothing wrong. Some kinds of blocks restrict editing from specific service providers or telecom companies in response to recent abuse or vandalism, and can sometimes affect other users who are unrelated to that abuse. Review the information below for assistance if you do not believe that you have done anything wrong.

This block affects editing on all Wikimedia wikis.
The IP address or range 3.209.0.0/16 has been globally blocked by ‪Jon Kolbert‬ for the following reason(s):

Open proxy/Webhost: See the help page if you are affected

This block will expire on 05:35, 21 February 2029. Your current IP address is 3.209.56.232.

Even while globally blocked, you will usually still be able to edit pages on Meta-Wiki.

If you believe you were blocked by mistake, you can find additional information and instructions in the No open proxies global policy. Otherwise, to discuss the block please post a request for review on Meta-Wiki. You could also send an email to the stewards VRT queue at stewards@wikimedia.org including all above details.

Other useful links: Global blocks · Help:I have been blocked

You can view and copy the source of this page:

{{Short description|Representation of a signal as a rectangular wave with varying duty cycle}}
{{Redirect|Pulsewidth|the song by Aphex Twin|Selected Ambient Works 85–92}}
{{Distinguish|Pulse-density modulation}}
{{Refimprove|date=April 2009}}

[[Image:PWM, 3-level.svg|thumb|right|350px|An example of PWM{{Clarification needed|reason=The picture more specifically uses either a [[three-valued logic]] PWM or possibly [[tri-state logic]] PWM as the blue input signal, because there is an additional intermediate state at 0V that could possibly represent either high-impedance for tri-state logic. This article doesn't actually talk about such 3-level PWM signals, but only deals with on-off 2-level PWM signals, so maybe this isn't the best intro picture without more explanation.|date=February 2024}} in an idealized inductor driven by a {{colorbull|blue}} voltage source modulated as a series of pulses, resulting in a {{colorbull|red}} sine-like current in the inductor. The rectangular voltage pulses nonetheless result in a more and more smooth current waveform, as the ''switching frequency'' increases.  The current waveform is the integral of the voltage waveform.]]
{{Modulation techniques}}

'''Pulse-width modulation''' ('''PWM'''), also known as '''pulse-duration modulation''' ('''PDM''') or '''pulse-length modulation''' ('''PLM'''),<ref>{{Cite journal |date=2018 |editor-last=Butterfield |editor-first=Andrew J. |editor2-last=Szymanski |editor2-first=John |title=A Dictionary of Electronics and Electrical Engineering |url=http://dx.doi.org/10.1093/acref/9780198725725.001.0001 |journal=Oxford Reference |doi=10.1093/acref/9780198725725.001.0001|isbn=978-0-19-872572-5 }}</ref> is any method of representing a signal as a [[rectangular wave]] with a varying [[duty cycle]] (and for some methods also a varying [[Period of a function|period]]).

PWM is useful for controlling the average [[Power (physics)|power]] or [[amplitude]] delivered by an electrical signal. The average value of [[volt]]age (and [[electric current|current]]) fed to the [[electrical load|load]] is controlled by switching the supply between 0 and 100% at a rate faster than it takes the load to change significantly. The longer the switch is on, the higher the total power supplied to the load. Along with [[maximum power point tracking]] (MPPT), it is one of the primary methods of controlling the output of solar panels to that which can be utilized by a battery.<ref>{{cite web|url=https://www.homepower.com/articles/solar-electricity/design-installation/sizing-grid-tied-pv-system-battery-backup|title=Sizing a Grid-Tied PV System ...with Battery Backup |work= Home Power Magazine}}</ref> PWM is particularly suited for running inertial loads such as motors, which are not as easily affected by this discrete switching. The goal of PWM is to control a load; however, the PWM switching frequency must be selected carefully in order to smoothly do so.

The PWM switching frequency can vary greatly depending on load and application. For example, switching only has to be done several times a minute in an electric stove; 100 or 120&nbsp;[[Hz]] (double of the [[utility frequency]]) in a [[dimmer|lamp dimmer]]; between a few kilohertz (kHz) and tens of kHz for a motor drive; and well into the tens or hundreds of kHz in audio amplifiers and computer power supplies. Choosing a switching frequency that is too high for the application may cause premature failure of mechanical control components despite getting smooth control of the load. Selecting a switching frequency that is too low for the application causes oscillations in the load. The main advantage of PWM is that power loss in the switching devices is very low. When a switch is off there is practically no current, and when it is on and power is being transferred to the load, there is almost no voltage drop across the switch. Power loss, being the product of voltage and current, is thus in both cases close to zero. PWM also works well with digital controls, which, because of their on/off nature, can easily set the needed duty cycle. PWM has also been used in certain communication systems where its duty cycle has been used to convey information over a communications channel.

In electronics, many modern [[microcontroller]]s (MCUs) integrate '''PWM controllers''' exposed to external pins as peripheral devices under [[firmware]] control. These are commonly used for [[direct current]] (DC) [[motor controller|motor control]] in [[robotics]], [[switched-mode power supply]] regulation, and other applications.

==Duty cycle==
The term ''[[duty cycle]]'' describes the proportion of 'on' time to the regular interval or 'period' of time; a low duty cycle corresponds to low power, because the power is off for most of the time. Duty cycle is expressed in percent, 100% being fully on. When a digital signal is on half of the time and off the other half of the time, the digital signal has a duty cycle of 50% and resembles a "square" wave. When a digital signal spends more time in the on state than the off state, it has a duty cycle of >50%. When a digital signal spends more time in the off state than the on state, it has a duty cycle of <50%. Here is a pictorial that illustrates these three scenarios:

[[File:Duty_Cycle_Examples.png|frameless|400x400px]]

==History==
The [[Corliss steam engine]] was patented in 1849. It used pulse-width modulation to control the intake valve of a steam engine cylinder. A [[centrifugal governor]] was used to provide automatic feedback.

Some machines (such as a [[sewing machine]] motor) require partial or variable power.  In the past, control (such as in a sewing machine's foot pedal) was implemented by use of a [[rheostat]] connected in series with the motor to adjust the amount of current flowing through the motor.  It was an inefficient scheme, as this also wasted power as heat in the resistor element of the rheostat, but tolerable because the total power was low. While the rheostat was one of several methods of controlling power (see [[autotransformer]]s and [[Variac]] for more info), a low cost and efficient power switching/adjustment method was yet to be found. This mechanism also needed to be able to drive motors for fans, pumps and [[robotic]] [[servomechanism]]s, and needed to be compact enough to interface with lamp dimmers.  PWM emerged as a solution for this complex problem.

The [[Philips|Philips, N. V.]] company designed an optical scanning system ([https://www.pearl-hifi.com/06_Lit_Archive/02_PEARL_Arch/Vol_16/Sec_53/Philips_Tech_Review/PTechReview-08-1946-097.pdf published] in 1946) for [[Optical sound|variable area]] film [[soundtrack]] which produced the PWM. It was intended to reduce noise when playing back a film soundtrack. The proposed system had a threshold between "white" and "black" parts of soundtrack.<ref>{{Cite journal |last=Westmijze |first=W. K. |date=1946 |title=A New Method of Counteracting Noise in Sound Film Reproduction |url=https://ieeexplore.ieee.org/document/7252228/authors#authors |archive-url=https://web.archive.org/web/20220906215112/https://ieeexplore.ieee.org/document/7252228/authors#authors |url-status=dead |archive-date=September 6, 2022 |journal=Journal of the Society of Motion Picture Engineers |volume=47 |issue=5 |pages=426–440 |doi=10.5594/J12769 |issn=0097-5834 |via=IEEE}}</ref>

One early application of PWM was in the [[Sinclair Radionics|Sinclair]] X10, a 10&nbsp;W audio amplifier available in kit form in the 1960s. At around the same time, PWM started to be used in AC motor control.<ref>{{cite journal  | last =Schönung   | first =A. |author2=Stemmler, H.  | title =Geregelter Drehstrom-Umkehrantrieb mit gesteuertem Umrichter nach dem Unterschwingungsverfahren | journal =BBC Mitteilungen | volume = 51 | issue = 8/9 | pages =555–577 | date =August 1964 }}</ref>

Of note, for about a century, some variable-speed electric motors have had decent efficiency, but they were somewhat more complex than constant-speed motors, and sometimes required bulky external electrical apparatus, such as a bank of variable power resistors or rotating converters such as the [[Ward Leonard control|Ward Leonard drive]].

==Principle==
=== Periodic pulse wave ===
[[Image:Duty cycle general.svg|thumb|350px|Fig. 1: a periodic [[pulse wave]], showing <math>y_\text{min}</math>, <math>y_\text{max}</math> and constant duty cycle D.]]

If we consider a periodic [[pulse wave]] <math>f(t)</math> with period <math>T</math>, low value <math>y_\text{min}</math>, a high value <math>y_\text{max}</math> and a constant duty cycle D (Figure 1), the average value of the waveform is given by:

<math display="block">\bar{y} = \frac{1}{T}\int^T_0f(t)\,dt</math>

As <math>f(t)</math> is a pulse wave, its value is <math>y_\text{max}</math> for <math>0 < t < D \cdot T</math> and <math>y_\text{min}</math> for <math>D \cdot T < t < T</math>. The above expression then becomes:

<math display="block">\begin{align}
  \bar{y} &= \frac{1}{T} \left(\int_0^{DT} y_\text{max}\,dt + \int_{DT}^T y_\text{min}\,dt\right)\\
          &= \frac{1}{T} \left(D \cdot T \cdot y_\text{max} + T\left(1 - D\right) y_\text{min}\right)\\
          &= D\cdot y_\text{max} + \left(1 - D\right) y_\text{min}
\end{align}</math>

This latter expression can be fairly simplified in many cases where <math>y_\text{min} = 0</math> as <math>\bar{y} = D \cdot y_\text{max}</math>. From this, the average value of the signal (<math>\bar{y}</math>) is directly dependent on the duty cycle D.

However, by varying (i.e. modulating) the duty cycle (and possibly also the period), the following more advanced pulse-width modulated waves allow variation of the [[average]] value of the waveform.

=== Intersective method PWM ===
[[File:Pwm.svg|frameless|400x400px]]

The intersective method is a simple way to generate a PWM output signal (magenta in above figure) with fixed period and varying duty cycle is by using a [[comparator]] to switch the PWM output state when the input waveform (red) intersects with a [[Sawtooth wave|sawtooth]] or a [[Triangle wave|triangle]] waveform (blue).

Depending on the type of sawtooth or triangle waveform (green in below figure), intersective PWM signals (blue in the below figure) can be aligned in three manners:

[[File:Three_PWM_types.svg|frameless|400x400px]]

* Leading [[Signal edge|edge]] modulation (top plot) uses a reverse sawtooth wave to generate the PWM. The PWM's leading edge is held at the leading edge of the window and the trailing edge is modulated.
* Trailing edge modulation (middle plot) uses a normal sawtooth wave to generate the PWM. The PWM's trailing edge is fixed and the leading edge is modulated.
* Centered pulses (bottom) uses a triangle waveform to generate the PWM. The pulse center is fixed in the center of the time window and both edges of the pulse are moved to compress or expand the width.

==== Time proportioning ====
Many digital circuits can generate PWM signals (e.g., many [[microcontrollers]] have PWM outputs). They normally use a [[counter (digital)|counter]] that increments periodically (it is connected directly or indirectly to the [[clock signal|clock]] of the circuit) and is reset at the end of every period of the PWM. When the counter value is more than the reference value, the PWM output changes state from high to low (or low to high).<ref>{{cite web |last=Barr |first=Michael |date=1 September 2001 |title=Introduction to Pulse Width Modulation (PWM) |url=https://barrgroup.com/Embedded-Systems/How-To/PWM-Pulse-Width-Modulation |website=Barr Group}}</ref> This technique is referred to as '''time proportioning,''' particularly as '''time-proportioning control'''<ref>''Fundamentals of HVAC Control Systems,'' by Robert McDowall, [https://books.google.com/books?id=UMk1EUp-W-UC&pg=PA21&dq=%22time+proportioning%22 p. 21]</ref> – which ''proportion'' of a fixed cycle time is spent in the high state.

The incremented and periodically reset counter is the discrete version of the intersecting method's sawtooth. The analog comparator of the intersecting method becomes a simple integer comparison between the current counter value and the digital (possibly digitized) reference value. The duty cycle can only be varied in discrete steps, as a function of the counter resolution. However, a high-resolution counter can provide quite satisfactory performance.

==== Spectrum ====
The resulting [[spectrum|spectra]] (of the three alignments) are similar. Each contains a [[Direct current|dc]] component, a base sideband containing the modulating signal, and phase modulated [[Carrier signal|carriers]] at each [[harmonic]] of the frequency of the pulse. The amplitudes of the harmonic groups are restricted by a <math>\sin x / x</math> envelope ([[sinc function]]) and extend to infinity. The infinite bandwidth is caused by the nonlinear operation of the pulse-width modulator. In consequence, a digital PWM suffers from [[aliasing]] distortion that significantly reduce its applicability for modern [[communication system]]s. By limiting the bandwidth of the PWM kernel, aliasing effects can be avoided.<ref>{{cite journal |last=Hausmair |first=Katharina |author2=Shuli Chi |author3=Peter Singerl |author4=Christian Vogel |date=February 2013 |title=Aliasing-Free Digital Pulse-Width Modulation for Burst-Mode RF Transmitters |journal=IEEE Transactions on Circuits and Systems I: Regular Papers |volume=60 |issue=2 |pages=415–427 |citeseerx=10.1.1.454.9157 |doi=10.1109/TCSI.2012.2215776 |s2cid=21795841}}</ref>

On the contrary, [[delta modulation]] and [[delta-sigma modulation]] are random processes{{Clarification needed|reason=What exactly is meant by "random" here?|date=February 2024}} that produces a continuous spectrum without distinct harmonics. While intersective PWM uses a fixed period but a varying duty cycle, the period of delta and delta-sigma modulated PWMs varies in addition to their duty cycle.

===Delta modulation===
{{Main|Delta modulation}}[[File:Delta_PWM.svg|frameless|400x400px]]

Delta modulation produces a PWM signal (magenta in above figure) which changes state whenever its integral (blue) hits the limits (green) surrounding the input (red). 

=== Asynchronous delta-sigma PWM ===
{{Main|Delta-sigma modulation#Asynchronous delta-sigma modulation}}

[[File:Sigma-delta_PWM.svg|frameless|400x400px]]

[[Asynchronous circuit|Asynchronous]] (i.e. unclocked) delta-sigma modulation produces a PWM output (blue in bottom plot) which is subtracted from the input signal (green in top plot) to form an error signal (blue in top plot). This error is integrated (magenta in middle plot). When the integral of the error exceeds the limits (the upper and lower grey lines in middle plot), the PWM output changes state. By integrating the difference of the error with the input signal, delta-sigma modulation [[Noise shaping|shapes noise]] of the resulting spectrum to be more in higher frequencies above the input signal's band.

===Space vector modulation===

{{Main|Space vector modulation}}

Space vector modulation is a PWM control algorithm for multi-phase AC generation, in which the reference signal is sampled regularly; after each sample, non-zero active switching vectors adjacent to the reference vector and one or more of the zero switching vectors are selected for the appropriate fraction of the sampling period in order to synthesize the reference signal as the average of the used vectors.

===Direct torque control (DTC)===

{{Main|Direct torque control}}

Direct torque control is a method used to control AC motors. It is closely related with the delta modulation (see above). Motor torque and magnetic flux are estimated and these are controlled to stay within their hysteresis bands by turning on a new combination of the device's semiconductor switches each time either signal tries to deviate out of its band.

===PWM sampling theorem===
The process of PWM conversion is non-linear and it is generally supposed that low pass filter signal recovery is imperfect for PWM. The PWM sampling theorem<ref>J. Huang, K. Padmanabhan, and O. M. Collins, “The sampling theorem with constant amplitude variable width pulses”, IEEE transactions on Circuits and Systems, vol. 58, pp. 1178 - 1190, June 2011.</ref> shows that PWM conversion can be perfect:

<blockquote>Any [[bandlimited]] [[baseband]] signal whose amplitude is within ±0.637 can be represented by a PWM waveform of unit amplitude (±1). The number of pulses in the waveform is equal to the number of [[Nyquist rate|Nyquist samples]] and the peak constraint is independent of whether the waveform is two-level or three-level.</blockquote>

For comparison, the [[Nyquist–Shannon sampling theorem]] can be summarized as:

<blockquote>If you have a signal that is bandlimited to a bandwidth of f<sub>0</sub> then you can collect all the information there is in that signal by sampling it at discrete times, as long as your sample rate is greater than 2f<sub>0</sub>.<ref>{{cite web |last=Wescott |first=Tim |date=August 14, 2018 |title=Sampling: What Nyquist Didn't Say, and What to Do About It |url=http://www.wescottdesign.com/articles/Sampling/sampling.pdf |publisher=Wescott Design Services |quote=The Nyquist-Shannon sampling theorem is useful, but often misused when engineers establish sampling rates or design anti-aliasing filters.}}</ref></blockquote>

==Applications==

===Servos===
PWM is used to control servomechanisms; see [[servo control]].

===Telecommunications===
In [[telecommunications]], PWM  is a form of signal [[modulation#Pulse modulation methods|modulation]] where the widths of the pulses correspond to specific data values encoded at one end and decoded at the other.

Pulses of various lengths (the information itself) will be sent at regular intervals (the carrier frequency of the modulation).
           _      _      _      _      _      _      _      _     
          | |    | |    | |    | |    | |    | |    | |    | |    
 Clock    | |    | |    | |    | |    | |    | |    | |    | |    
        __| |____| |____| |____| |____| |____| |____| |____| |____
 
                  _      __     ____          ____   _
 PWM signal      | |    |  |   |    |        |    | | |
                 | |    |  |   |    |        |    | | |
        _________| |____|  |___|    |________|    |_| |___________
 
 Data       0     1       2      4      0      4     1      0

The inclusion of a [[clock signal]] is not necessary, as the leading edge of the data signal can be used as the clock if a small offset is added to each data value in order to avoid a data value with a zero length pulse.
                 _      __     ___    _____   _      _____   __     _   
                | |    |  |   |   |  |     | | |    |     | |  |   | | 
 PWM signal     | |    |  |   |   |  |     | | |    |     | |  |   | |  
              __| |____|  |___|   |__|     |_| |____|     |_|  |___| |_____
 
 Data            0       1      2       4     0        4      1     0

===Power delivery===
PWM can be used to control the amount of power delivered to a load without incurring the losses that would result from linear power delivery by resistive means. Drawbacks to this technique are that the power drawn by the load is not constant but rather discontinuous (see [[Buck converter]]), and energy delivered to the load is not continuous either.  However, the load may be inductive, and with a sufficiently high frequency and when necessary using additional passive [[electronic filter]]s, the pulse train can be smoothed and average analog waveform recovered.  Power flow into the load can be continuous. Power flow from the supply is not constant and will require energy storage on the supply side in most cases. (In the case of an electrical circuit, a capacitor to absorb energy stored in (often parasitic) supply side inductance.)

High [[frequency]] PWM power control systems are easily realisable with semiconductor switches. As explained above, almost no power is dissipated by the switch in either on or off state. However, during the transitions between on and off states, both voltage and current are nonzero and thus power is dissipated in the switches. By quickly changing the state between fully on and fully off (typically less than 100 nanoseconds), the power dissipation in the switches can be quite low compared to the power being delivered to the load.

Modern semiconductor switches such as [[MOSFET]]s or [[insulated-gate bipolar transistor]]s (IGBTs) are well suited components for high-efficiency controllers. Frequency converters used to control AC motors may have efficiencies exceeding 98%. Switching power supplies have lower efficiency due to low output voltage levels (often even less than 2 V for microprocessors are needed) but still more than 70–80% efficiency can be achieved.

Variable-speed [[computer fan control]]lers usually use PWM, as it is far more efficient when compared to a [[potentiometer]] or rheostat. (Neither of the latter is practical to operate electronically; they would require a small drive motor.)

Light dimmers for home use employ a specific type of PWM control. Home-use light dimmers typically include electronic circuitry that suppresses current flow during defined portions of each cycle of the AC line voltage. Adjusting the brightness of light emitted by a light source is then merely a matter of setting at what voltage (or phase) in the AC half-cycle the dimmer begins to provide electric current to the light source (e.g. by using an electronic switch such as a [[TRIAC|triac]]). In this case the PWM duty cycle is the ratio of the conduction time to the duration of the half AC cycle defined by the frequency of the AC line voltage (50&nbsp;Hz or 60&nbsp;Hz depending on the country).

These rather simple types of dimmers can be effectively used with inert (or relatively slow reacting) light sources such as incandescent lamps, for example, for which the additional modulation in supplied electrical energy which is caused by the dimmer causes only negligible additional fluctuations in the emitted light. Some other types of light sources such as light-emitting diodes (LEDs), however, turn on and off extremely rapidly and would perceivably flicker if supplied with low-frequency drive voltages. Perceivable flicker effects from such rapid response light sources can be reduced by increasing the PWM frequency. If the light fluctuations are sufficiently rapid (faster than the [[flicker fusion threshold]]), the human visual system can no longer resolve them and the eye perceives the time average intensity without flicker.

In electric cookers, continuously variable power is applied to the heating elements such as the hob or the grill using a device known as a [[simmerstat]]. This consists of a thermal oscillator running at approximately two cycles per minute and the mechanism varies the duty cycle according to the knob setting. The thermal time constant of the heating elements is several minutes so that the temperature fluctuations are too small to matter in practice.

===Voltage regulation===
{{Main|Switched-mode power supply}}

PWM is also used in efficient [[voltage regulator]]s. By switching the voltage to the load with the appropriate duty cycle, the output will approximate a voltage at the desired level. The switching noise is usually filtered with an [[inductor]] and a [[capacitor]].

One method measures the output voltage. When it is lower than the desired voltage, it turns on the switch. When the output voltage is above the desired voltage, it turns off the switch.

===Audio effects and amplification===
Varying the duty cycle of a pulse waveform in a synthesis instrument creates useful timbral variations. Some synthesizers have a duty-cycle trimmer for their square-wave outputs, and that trimmer can be set by ear; the 50% point (true square wave) is distinctive because even-numbered harmonics essentially disappear at 50%. Pulse waves, usually 50%, 25%, and 12.5%, make up the [[Video game music|soundtracks of classic video games]]. The term PWM as used in sound (music) synthesis refers to the ratio between the high and low level being secondarily modulated with a [[low-frequency oscillator]]. This gives a sound effect similar to [[Chorus (audio effect)|chorus]] or slightly detuned oscillators played together. (In fact, PWM is equivalent to the sum of two [[sawtooth wave]]s with one of them inverted.)<ref>{{Cite web|url=https://www.soundonsound.com/techniques/synthesizing-strings-pwm-string-sounds|title=Synthesizing Strings: PWM & String Sounds|website=www.soundonsound.com}}</ref> 

[[Class-D amplifier]]s produce a PWM equivalent of a lower frequency input signal that can be sent to a [[loudspeaker]] via a suitable filter network to block the carrier and recover the original lower frequency signal. Since they switch power directly from the high supply rail and low supply rail, these amplifiers have efficiency above 90% and can be relatively compact and light, even for large power outputs. For a few decades, industrial and military PWM amplifiers have been in common use, often for driving [[servomotor]]s. Field-gradient coils in [[MRI]] machines are driven by relatively high-power PWM amplifiers.

Historically, a crude form of PWM has been used to play back [[PCM]] digital sound on the [[PC speaker]], which is driven by only two voltage levels, typically 0&nbsp;V and 5&nbsp;V. By carefully timing the duration of the pulses, and by relying on the speaker's physical filtering properties (limited frequency response, self-inductance, etc.) it was possible to obtain an approximate playback of mono PCM samples, although at a very low quality, and with greatly varying results between implementations. The [[Sega 32X]] uses PWM to play sample-based sound in its games.

In more recent times, the [[Direct Stream Digital]] sound encoding method was introduced, which uses a generalized form of pulse-width modulation called [[pulse-density modulation]], at a high enough sampling rate (typically in the order of MHz) to cover the whole [[Acoustics|acoustic]] frequencies range with sufficient fidelity. This method is used in the [[Super Audio CD|SACD]] format, and reproduction of the encoded audio signal is essentially similar to the method used in class-D amplifiers.

===Electrical===
SPWM (sine–triangle pulse-width modulation) signals are used in micro-inverter design (used in solar and wind power applications). These switching signals are fed to the [[FET]]s that are used in the device. The device's efficiency depends on the harmonic content of the PWM signal. There is much research on eliminating unwanted harmonics and improving the fundamental strength, some of which involves using a modified carrier signal instead of a classic sawtooth signal<ref>Hirak Patangia, Sri Nikhil Gupta Gourisetti, "A Harmonically Superior Modulator with Wide Baseband and Real-Time Tunability", IEEE International Symposium on Electronic Design (ISED), India, Dec.11.</ref><ref>Hirak Patangia, Sri Nikhil Gupta Gourisetti, “Real Time Harmonic Elimination Using a Modified Carrier”, CONIELECOMP, Mexico, Feb 2012.</ref><ref>Hirak Patangia, Sri Nikhil Gupta Gourisetti, “A Novel Strategy for Selective Harmonic Elimination Based on a Sine-Sine PWM Model”, MWSCAS, U.S.A, Aug 2012.</ref> in order to decrease power losses and improve efficiency. Another common application is in robotics where PWM signals are used to control the speed of the robot by controlling the motors.

===Soft-blinking LED indicator===
PWM techniques would typically be used to make some indicator (like an [[LED]]) ''soft blink''. The light will slowly go from dark to full intensity, and slowly dimmed to dark again. Then it repeats. The period would be several soft blinks per second up to several seconds for one blink. An indicator of this type would not disturb as much as a ''hard-blinking'' on/off indicator. The indicator lamp on the [[IBook|Apple iBook G4, PowerBook 6,7 (2005)]] was of this type. This kind of indicator is also called ''pulsing glow'', as opposed to calling it ''flashing''.

==See also==
* [[Analog signal to discrete time interval converter]]
* [[Class-D amplifier]]
* [[Computer fan control]]
* [[Continuously variable slope delta modulation]]
* [[Delta-sigma modulation]]
* [[H-bridge]]
* [[Pulse-amplitude modulation]]
* [[Pulse-code modulation]]
* [[Pulse-density modulation]]
* [[Pulse-frequency modulation]]
* [[Pulse-position modulation]]
* [[Radio control]]
* [[Random pulse-width modulation]]
* [[Servo control|RC servo]]
* [[Sliding mode control]] - produces smooth behavior by way of discontinuous switching in systems
* [[Space vector modulation]]
* [[Sound chip]]

== References ==

{{reflist}}

== External links ==

{{Commons category|Pulse width modulation}}
*[http://www.beis.de/Elektronik/DeltaSigma/DeltaSigma.html An Introduction to Delta Sigma Converters]
*[http://www.pidlab.com/en/pwm-demo Pulse Width Modulation in PID control loop - free simulator]
*[http://www.tftcentral.co.uk/articles/pulse_width_modulation.htm Pulse Width Modulation in Desktop monitors - monitor flicker]

[[Category:Signal processing]]

Pages transcluded onto the current version of this page (help):

Pulsewidth (edit)
Template:Ambox (view source) (template editor protected)
Template:Category handler (view source) (protected)
Template:Cite journal (view source) (protected)
Template:Cite web (view source) (protected)
Template:Clarification needed (view source) (semi-protected)
Template:Clarify (view source) (template editor protected)
Template:Colorbull (view source) (template editor protected)
Template:Commons category (view source) (template editor protected)
Template:Delink (view source) (protected)
Template:Distinguish (view source) (template editor protected)
Template:Find sources mainspace (view source) (template editor protected)
Template:Fix-span (view source) (template editor protected)
Template:Fix/category (view source) (protected)
Template:Hlist/styles.css (view source) (protected)
Template:Main (view source) (template editor protected)
Template:Main other (view source) (protected)
Template:Modulation techniques (edit)
Template:More citations needed (view source) (template editor protected)
Template:Pagetype (view source) (protected)
Template:Plainlist/styles.css (view source) (protected)
Template:Redirect (view source) (template editor protected)
Template:Refimprove (view source) (template editor protected)
Template:Reflist (view source) (protected)
Template:Reflist/styles.css (view source) (protected)
Template:Replace (view source) (protected)
Template:SDcat (view source) (protected)
Template:Short description (view source) (protected)
Template:Short description/lowercasecheck (view source) (protected)
Template:Side box (view source) (template editor protected)
Template:Sister project (view source) (template editor protected)
Template:Sister project/styles.css (view source) (template editor protected)
Template:Title case (view source) (template editor protected)
Module:Arguments (view source) (protected)
Module:Category handler (view source) (protected)
Module:Category handler/blacklist (view source) (protected)
Module:Category handler/config (view source) (protected)
Module:Category handler/data (view source) (protected)
Module:Category handler/shared (view source) (protected)
Module:Check for unknown parameters (view source) (protected)
Module:Citation/CS1 (view source) (protected)
Module:Citation/CS1/COinS (view source) (protected)
Module:Citation/CS1/Configuration (view source) (protected)
Module:Citation/CS1/Date validation (view source) (protected)
Module:Citation/CS1/Identifiers (view source) (protected)
Module:Citation/CS1/Utilities (view source) (protected)
Module:Citation/CS1/Whitelist (view source) (protected)
Module:Citation/CS1/styles.css (view source) (protected)
Module:DecodeEncode (view source) (template editor protected)
Module:Delink (view source) (protected)
Module:Disambiguation/templates (view source) (protected)
Module:Distinguish (view source) (template editor protected)
Module:Find sources (view source) (template editor protected)
Module:Find sources/config (view source) (template editor protected)
Module:Find sources/links (view source) (template editor protected)
Module:Find sources/templates/Find sources mainspace (view source) (template editor protected)
Module:Format link (view source) (template editor protected)
Module:GetParameters (view source) (protected)
Module:Hatnote (view source) (template editor protected)
Module:Hatnote/styles.css (view source) (template editor protected)
Module:Hatnote list (view source) (template editor protected)
Module:Labelled list hatnote (view source) (template editor protected)
Module:Message box (view source) (protected)
Module:Message box/ambox.css (view source) (protected)
Module:Message box/configuration (view source) (protected)
Module:Namespace detect/config (view source) (protected)
Module:Namespace detect/data (view source) (protected)
Module:Navbar (view source) (protected)
Module:Navbar/configuration (view source) (protected)
Module:Navbar/styles.css (view source) (protected)
Module:Pagetype (view source) (protected)
Module:Pagetype/config (view source) (protected)
Module:Pagetype/disambiguation (view source) (protected)
Module:Pagetype/rfd (view source) (protected)
Module:Pagetype/setindex (view source) (protected)
Module:Pagetype/softredirect (view source) (protected)
Module:Redirect hatnote (view source) (template editor protected)
Module:SDcat (view source) (protected)
Module:Side box (view source) (template editor protected)
Module:Side box/styles.css (view source) (template editor protected)
Module:Sidebar (view source) (template editor protected)
Module:Sidebar/configuration (view source) (template editor protected)
Module:Sidebar/styles.css (view source) (template editor protected)
Module:String (view source) (protected)
Module:String2 (view source) (template editor protected)
Module:TableTools (view source) (protected)
Module:Unsubst (view source) (protected)
Module:WikidataIB (view source) (template editor protected)
Module:WikidataIB/nolinks (view source) (template editor protected)
Module:WikidataIB/titleformats (view source) (template editor protected)
Module:Wikitext Parsing (view source) (protected)
Module:Yesno (view source) (protected)

Return to Pulse-width modulation.

Retrieved from "https://en.wikipedia.org/wiki/Pulse-width_modulation"