Data degradation: Difference between revisions

It has been suggested that this article be merged with Data corruption. (Discuss) Proposed since October 2016.

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article may require cleanup to meet Wikipedia's quality standards. The specific problem is: needs extensive revision to avoid confusing different mechanisms for data degradation in different media. Please help improve this article if you can. (March 2014) (Learn how and when to remove this message) This article possibly contains original research. Please improve it by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. (April 2015) (Learn how and when to remove this message) (Learn how and when to remove this message)

Data degradation is the gradual corruption of computer data due to an accumulation of non-critical failures in a data storage device. The phenomenon is also known as data decay or data rot.

Data degradation in dynamic random-access memory (DRAM) can occur when the small electric charge of a bit in DRAM disperses, possibly altering program code or stored data. Semiconductor RAM may also occasionally be altered by cosmic rays or other high-energy particles. Such data degradation is known as soft errors.^[1] Different variants of ECC memory can be used to mitigate this type of data degradation.

Data degradation can also be used to describe the phenomenon of storage media gradually decaying over the duration of many hundreds of years. The cause of data decay varies depending on the medium:

• Solid-state media, such as EPROMs, flash memory and other solid-state drives, store data using electrical charges, which can slowly leak away due to imperfect insulation. The chip itself is not affected by this, so reprogramming it once per decade or so will prevent data decay. The biggest problem can be finding a clean copy of the master data from which the chip may be reprogrammed; frequently, by the time the user discovers the data decay, the master data may be lost.^{[citation needed]}
• Magnetic media, such as hard disk drives, floppy disks and magnetic tapes, may experience data decay as bits lose their magnetic orientation. Periodic refreshing by rewriting the data can alleviate this problem. Also, in warm and humid conditions these media, especially the ones poorly protected against aggressive air conditions, are prone to the decomposition of the very material they are fabricated from.
• Optical media, such as CD-R, DVD-R and BD-R, may experience data decay from the breakdown of the material onto which the data is stored. This can be mitigated by storing discs in a dark, cool location with low humidity. "Archival quality" discs are also available, but do not necessarily provide a permanent solution to the onset of data decay or other types of data corruption beyond a certain amount of time.^{[citation needed]} Some media (such as M-DISC) are designed to improve longevity over DVD-R and BD-R.
• Paper media, such as punched cards and punched tape, may also experience literal rotting. Mylar punched tape is available for use in such situations.

Most disk, disk controller and higher-level systems are subject to a small degree of unrecoverable failure. With ever-growing disk capacities, file sizes, and increases in the amount of data stored on a disk, the likelihood of the occurrence of data decay and other forms of uncorrected and undetected data corruption increases.^[2]

Higher-level software systems may be employed to mitigate the risk of such underlying failures by increasing redundancy and implementing integrity checking and self-repairing algorithms.^[3] The ZFS file system was designed to address many of these data corruption issues.^[4] The Btrfs file system also includes data protection and recovery mechanisms,^[5] and so does ReFS.^[6]