3d print camping

Pocket-sized spice rack for outdoor outings, whether camping or trekking in the open air, easy to carry. It has 2 deposits, one for salt and one for spices, each deposit comes with its name in relief plus a lid that separates both. Made with PLA Sakata3D 850

This is a folding tripod to support cans of camping fuel for your burners or to help keep butane cans upright. It is very light and compact and supports the tall butane cans and the small and large sizes of camping fuel canisters. Similar products are $8-10 online. Why purchase it if you have a printer? External hardware required: 3x M3x16 screw minimum. It can be longer if you want to but keep in mind they will stick out 3x M3 Nuts Printing: Print one hub and 3 legs. I went with PLA but if…

Designed for use on soft ground.

I found that none of the existing stove canister mounts were working for my canisters; different canister sizes has small variations in dimension, and

opengreenenergy used Fusion 360 to design this nifty 3D printed adapter that makes a water bottle into a solar lamp! #Instructables #3Dprint #3Ddesign #Fusion360 #camping

Get ready for your next trip with the coolest 3D printed travel accessories. Check them out and make your summer escape even better!

I made this hooks with a bracket cause I wanted to add some without drilling. They are for my Carado campervan. The design complies a bit with the original hooks. They first were made made for the thicker boards (15.5 mm) - but they are easily scaled down for the thinner ones (backside of the bench)

A set of 27 stl files. DnD camp minis for 3D printing. For Ttrpg, wargaming, DnD. 3D print files available through the Kickstarter

https://youtu.be/_dE6SNyYASAMade for extreme outdoor conditions, the Peakboil stove doesn't only work in the harshest of winds, it actually is optimized to boil