Detect and track objects with ML Kit on iOS

You can use ML Kit to detect and track objects in successive video frames.

When you pass an image to ML Kit, it detects up to five objects in the image along with the position of each object in the image. When detecting objects in video streams, each object has a unique ID that you can use to track the object from frame to frame. You can also optionally enable coarse object classification, which labels objects with broad category descriptions.

Try it out

• Play around with the sample app to see an example usage of this API.
• See the Material Design showcase app for an end-to-end implementation of this API.

Before you begin

1. Include the following ML Kit pods in your Podfile:

   pod 'GoogleMLKit/ObjectDetection', '7.0.0'
   

2. After you install or update your project's Pods, open your Xcode project using its .xcworkspace. ML Kit is supported in Xcode version 12.4 or greater.

1. Configure the object detector

To detect and track objects, first create an instance of ObjectDetector and optionally specify any detector settings you want to change from the default.

1. Configure the object detector for your use case with an ObjectDetectorOptions object. You can change the following settings:

   Object Detector Settings
   Detection mode	.stream (default) | .singleImage In stream mode (default), the object detector runs with very low latency, but might produce incomplete results (such as unspecified bounding boxes or categories) on the first few invocations of the detector. Also, in stream mode, the detector assigns tracking IDs to objects, which you can use to track objects across frames. Use this mode when you want to track objects, or when low latency is important, such as when processing video streams in real time. In single image mode, the object detector returns the result after the object's bounding box is determined. If you also enable classification it returns the result after the bounding box and category label are both available. As a consequence, detection latency is potentially higher. Also, in single image mode, tracking IDs are not assigned. Use this mode if latency isn't critical and you don't want to deal with partial results.
   Detect and track multiple objects	false (default) | true Whether to detect and track up to five objects or only the most prominent object (default).
   Classify objects	false (default) | true Whether or not to classify detected objects into coarse categories. When enabled, the object detector classifies objects into the following categories: fashion goods, food, home goods, places, and plants.

   The object detection and tracking API is optimized for these two core use cases:

   • Live detection and tracking of the most prominent object in the camera viewfinder.
   • The detection of multiple objects in a static image.

   To configure the API for these use cases:

// Live detection and tracking
let options = ObjectDetectorOptions()
options.shouldEnableClassification = true

// Multiple object detection in static images
let options = ObjectDetectorOptions()
options.detectorMode = .singleImage
options.shouldEnableMultipleObjects = true
options.shouldEnableClassification = true

// Live detection and tracking
MLKObjectDetectorOptions *options = [[MLKObjectDetectorOptions alloc] init];
options.shouldEnableClassification = YES;

// Multiple object detection in static images
MLKObjectDetectorOptions *options = [[MLKOptions alloc] init];
options.detectorMode = MLKObjectDetectorModeSingleImage;
options.shouldEnableMultipleObjects = YES;
options.shouldEnableClassification = YES;

1. Get an instance of ObjectDetector:

let objectDetector = ObjectDetector.objectDetector()

// Or, to change the default settings:
let objectDetector = ObjectDetector.objectDetector(options: options)

MLKObjectDetector *objectDetector = [MLKObjectDetector objectDetector];

// Or, to change the default settings:
MLKObjectDetector *objectDetector = [MLKObjectDetector objectDetectorWithOptions:options];

2. Prepare the input image

To detect and track objects, do the following for each image or frame of video. If you enabled stream mode, you must create VisionImage objects from CMSampleBuffers.

Create a VisionImage object using a UIImage or a CMSampleBuffer.

If you use a UIImage, follow these steps:

• Create a VisionImage object with the UIImage. Make sure to specify the correct .orientation.

  Swift

  let image = VisionImage(image: UIImage)
  visionImage.orientation = image.imageOrientation

  Objective-C

  MLKVisionImage *visionImage = [[MLKVisionImage alloc] initWithImage:image];
  visionImage.orientation = image.imageOrientation;

If you use a CMSampleBuffer, follow these steps:

• Specify the orientation of the image data contained in the CMSampleBuffer.

  To get the image orientation:

  Swift

  func imageOrientation(
    deviceOrientation: UIDeviceOrientation,
    cameraPosition: AVCaptureDevice.Position
  ) -> UIImage.Orientation {
    switch deviceOrientation {
    case .portrait:
      return cameraPosition == .front ? .leftMirrored : .right
    case .landscapeLeft:
      return cameraPosition == .front ? .downMirrored : .up
    case .portraitUpsideDown:
      return cameraPosition == .front ? .rightMirrored : .left
    case .landscapeRight:
      return cameraPosition == .front ? .upMirrored : .down
    case .faceDown, .faceUp, .unknown:
      return .up
    }
  }
        

  Objective-C

  - (UIImageOrientation)
    imageOrientationFromDeviceOrientation:(UIDeviceOrientation)deviceOrientation
                           cameraPosition:(AVCaptureDevicePosition)cameraPosition {
    switch (deviceOrientation) {
      case UIDeviceOrientationPortrait:
        return cameraPosition == AVCaptureDevicePositionFront ? UIImageOrientationLeftMirrored
                                                              : UIImageOrientationRight;
  
      case UIDeviceOrientationLandscapeLeft:
        return cameraPosition == AVCaptureDevicePositionFront ? UIImageOrientationDownMirrored
                                                              : UIImageOrientationUp;
      case UIDeviceOrientationPortraitUpsideDown:
        return cameraPosition == AVCaptureDevicePositionFront ? UIImageOrientationRightMirrored
                                                              : UIImageOrientationLeft;
      case UIDeviceOrientationLandscapeRight:
        return cameraPosition == AVCaptureDevicePositionFront ? UIImageOrientationUpMirrored
                                                              : UIImageOrientationDown;
      case UIDeviceOrientationUnknown:
      case UIDeviceOrientationFaceUp:
      case UIDeviceOrientationFaceDown:
        return UIImageOrientationUp;
    }
  }
        

• Create a VisionImage object using the CMSampleBuffer object and orientation:

  Swift

  let image = VisionImage(buffer: sampleBuffer)
  image.orientation = imageOrientation(
    deviceOrientation: UIDevice.current.orientation,
    cameraPosition: cameraPosition)

  Objective-C

   MLKVisionImage *image = [[MLKVisionImage alloc] initWithBuffer:sampleBuffer];
   image.orientation =
     [self imageOrientationFromDeviceOrientation:UIDevice.currentDevice.orientation
                                  cameraPosition:cameraPosition];

3. Process the image

To detect objects asynchronously:

objectDetector.process(image) { objects, error in
  guard error == nil else {
    // Error.
    return
  }
  guard !objects.isEmpty else {
    // No objects detected.
    return
  }

  // Success. Get object info here.
  // ...
}

[objectDetector processImage:image
                  completion:^(NSArray * _Nullable objects,
                               NSError * _Nullable error) {
                    if (error == nil) {
                      return;
                    }
                    if (objects.count == 0) {
                      // No objects detected.
                      return;
                    }

                    // Success. Get object info here.
                  }];

To detect objects synchronously:

var objects: [Object]
do {
  objects = try objectDetector.results(in: image)
} catch let error {
  print("Failed to detect object with error: \(error.localizedDescription).")
  return
}
guard !objects.isEmpty else {
  print("Object detector returned no results.")
  return
}

// Success. Get object info here.

NSError *error;
NSArray *objects = [objectDetector resultsInImage:image error:&error];
if (error == nil) {
  return;
}
if (objects.count == 0) {
  // No objects detected.
  return;
}

// Success. Get object info here.

4. Get information about detected objects

Each Object contains the following properties:

// objects contains one item if multiple object detection wasn't enabled.
for object in objects {
  let frame = object.frame
  let trackingID = object.trackingID

  // If classification was enabled:
  let description = object.labels.enumerated().map { (index, label) in
    "Label \(index): \(label.text), \(label.confidence)"
    }.joined(separator:"\n")

}

// The list of detected objects contains one item if multiple
// object detection wasn't enabled.
for (MLKObject *object in objects) {
  CGRect frame = object.frame;
  NSNumber *trackingID = object.trackingID;
  for (MLKObjectLabel *label in object.labels) {
    NSString *labelString = [NSString stringWithFormat: @"%@, %f, %lu",
      label.text, label.confidence, (unsigned long)label.index];
    ...
  }
}