"[Shaping pillars] (as fig. 8), each end of table, exclusive of cross rails or splats...0[£.] 5[s.] 6[d.]

"Each upright wood splat, framed in the cross rails at top and bottom, either when flat and the edges rounded, or rounded out of mahogany, and put in with a center-bit hole...0 0 4

"When ditto are framed through the cross rail, at letter A, into the lining rail, each splat...0 0 6

"Tapering either of the above standards, each side...0 0 1¼

"All the above ends, the start pillar included, to start one and a half inch thick : if made out of inch stuff, deduct from the shilling on the price of the standard...0 0 2½

"From one and a half to two inches thick, add to ditto, on the shilling... 0 0 2½

"A solid end ( as fig. 9, Plate of ditto), cut out of one piece and shaped, extra from start pillar, exclusive of splats...0 3 2

"A ditto ( as fig. 10), cut out and shaped, extra from start, exclusive of splats...0 3 10

"Tapering the ends, fig. 9 or 10, each side...0 0 3

"For veneering these standards—See TABLE, N°. 35"