Speech Synthesis Markup Language (SSML) Version 1.1
W3C Recommendation 7 September 2010
- This version:
- http://www.w3.org/TR/2010/REC-speech-synthesis11-20100907/
- Latest version:
- http://www.w3.org/TR/speech-synthesis11/
- Previous version:
- http://www.w3.org/TR/2010/PR-speech-synthesis11-20100223/
Editors:- Daniel C. Burnett, Voxeo (formerly of Vocalocity and Nuance)
- 双志伟 (Zhi Wei Shuang), IBM
- Authors:
- Paolo Baggia, Loquendo
- Paul Bagshaw, France Telecom
- Michael Bodell, Microsoft
- 黄德智 (De Zhi Huang), France Telecom
- 楼晓雁 (Lou Xiaoyan), Toshiba
- Scott McGlashan, HP
- 陶建华 (Jianhua Tao), Chinese Academy of Sciences
- 严峻 (Yan Jun), iFLYTEK
- 胡方 (Hu Fang) (until 20 October 2009 while an Invited Expert)
- 康��国 (Yongguo Kang) (until 5 December 2007 while at Panasonic Corporation)
- 蒙美玲 (Helen Meng) (until 29 July 2009 while at Chinese University of Hong Kong)
- 王霞 (Wang Xia) (until 30 October 2006 while at Nokia)
- 夏海荣 (Xia Hairong) (until 2 August 2006 while at Panasonic Corporation)
- 吴志勇 (Zhiyong Wu) (until 29 July 2009 while at Chinese University of Hong Kong)
Please refer to the
errata
for this document, which may include some normative
corrections.
See also
translations.
Copyright © 2010 W3C® (MIT, ERCIM, Keio), All Rights Reserved. W3C liability, trademark and document use rules apply.
The Voice Browser Working Group has sought to develop standards to enable access to the Web using spoken interaction. The Speech Synthesis Markup Language Specification is one of these standards and is designed to provide a rich, XML-based markup language for assisting the generation of synthetic speech in Web and other applications. The essential role of the markup language is to provide authors of synthesizable content a standard way to control aspects of speech such as pronunciation, volume, pitch, rate, etc. across different synthesis-capable platforms.
Status of this Document
This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.
This is the
Recommendation
of "Speech Synthesis Markup Language (SSML) Version 1.1".
It has been produced by the
Voice Browser Working Group,
which is part of the
Voice Browser Activity.
Comments are welcome on www-voice@w3.org (archive).
See W3C mailing list and archive
usage guidelines.
The design of SSML 1.1 has been widely reviewed (see the
disposition of comments)
and satisfies the Working Group's technical requirements.
A list of implementations is included in the
SSML 1.1 Implementation Report,
along with the associated test suite.
The Working Group made a few editorial changes to the
23 February 2010 Proposed Recommendation in response to comments.
Changes from the Proposed Recommendation can be found in
Appendix G.
Also changes from SSML 1.0 including a note on backwards compatibility
to SSML 1.0 can be found in
Appendix F.
This document enhances SSML 1.0 [SSML] to provide better support for a broader set of natural (human) languages. To determine in what ways, if any, SSML is limited by its design with respect to supporting languages that are in large commercial or emerging markets for speech synthesis technologies but for which there was limited or no participation by either native speakers or experts during the development of SSML 1.0, the W3C held three workshops on the Internationalization of SSML. The first workshop [WS], in Beijing, PRC, in October 2005, focused primarily on Chinese, Korean, and Japanese languages, and the second [WS2], in Crete, Greece, in May 2006, focused primarily on Arabic, Indian, and Eastern European languages. The third workshop [WS3], in Hyderabad, India, in January 2007, focused heavily on Indian and Middle Eastern languages. Information collected during these workshops was used to develop a requirements document [REQS11]. Changes from SSML 1.0 are motivated by these requirements.
This document has been reviewed by W3C Members, by software
developers, and by other W3C groups and interested parties, and is
endorsed by the Director as a W3C Recommendation. It is a stable
document and may be used as reference material or cited from another
document. W3C's role in making the Recommendation is to draw
attention to the specification and to promote its widespread
deployment. This enhances the functionality and interoperability of
the Web.
This document was produced by a group operating under the 5 February 2004 W3C Patent Policy. W3C maintains a public list of any patent disclosures made in connection with the deliverables of the group; that page also includes instructions for disclosing a patent. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) must disclose the information in accordance with section 6 of the W3C Patent Policy.
The sections in the main body of this document are normative
unless otherwise specified. The appendices in this document are
informative unless otherwise indicated explicitly.
Table of Contents
1. Introduction
This W3C specification is known as the Speech Synthesis Markup Language specification (SSML) and is based upon the JSGF and/or JSML specifications, which are owned by Sun Microsystems, Inc., California, U.S.A. The JSML specification can be found at [JSML].
SSML is part of a larger set of markup specifications for voice browsers developed through the open processes of the W3C. It is designed to provide a rich, XML-based markup language for assisting the generation of synthetic speech in Web and other applications. The essential role of the markup language is to give authors of synthesizable content a standard way to control aspects of speech output such as pronunciation, volume, pitch, rate, etc. across different synthesis-capable platforms. A related initiative to establish a standard system for marking up text input is SABLE [SABLE], which tried to integrate many different XML-based markups for speech synthesis into a new one. The activity carried out in SABLE was also used as the main starting point for defining the Speech Synthesis Markup Requirements for Voice Markup Languages [REQS]. Since then, SABLE itself has not undergone any further development.
The intended use of SSML is to improve the quality of synthesized content. Different markup elements impact different stages of the synthesis process (see Section 1.2). The markup may be produced either automatically, for instance via XSLT or CSS3 from an XHTML document, or by human authoring. Markup may be present within a complete SSML document (see Section 2.2.2) or as part of a fragment (see Section 2.2.1) embedded in another language, although no interactions with other languages are specified as part of SSML itself. Most of the markup included in SSML is suitable for use by the majority of content developers; however, some advanced features like phoneme and prosody (e.g. for speech contour design) may require specialized knowledge.
1.1 Design Concepts
The design and standardization process has followed from the Speech Synthesis Markup Requirements for Voice Markup Languages [REQS].
The following items were the key design criteria.
- Consistency: provide predictable control of voice output across platforms and across speech synthesis implementations.
- Interoperability: support use along with other W3C specifications including (but not limited to) VoiceXML, aural Cascading Style Sheets and SMIL.
- Generality: support speech output for a wide range of applications with varied speech content.
- Internationalization: Enable speech output in a large number of languages within or across documents.
- Generation and Readability: Support automatic generation and hand authoring of documents. The documents should be human-readable.
- Implementable: The specification should be implementable with existing, generally available technology, and the number of optional features should be minimal.
1.2 Speech Synthesis Process Steps
A Text-To-Speech system (a synthesis processor) that supports SSML will be responsible for rendering a document as spoken output and for using the information contained in the markup to render the document as intended by the author.
Document creation: A text document provided as input to the synthesis processor may be produced automatically, by human authoring, or through a combination of these forms. SSML defines the form of the document.
Document processing: The following are the six major processing steps undertaken by a synthesis processor to convert marked-up text input into automatically generated voice output. The markup language is designed to be sufficiently rich so as to allow control over each of the steps described below so that the document author (human or machine) can control the final voice output. Although each step below is divided into "markup support" and "non-markup behavior", actual behavior is usually a mix of the two and varies depending on the tag. The processor has the ultimate authority to ensure that what it produces is pronounceable (and ideally intelligible). In general the markup provides a way for the author to make prosodic and other information available to the processor, typically information the processor would be unable to acquire on its own. It is then up to the processor to determine whether and in what way to use the information.
-
XML parse: An XML parser is used to extract the document tree and content from the incoming text document. The structure, tags and attributes obtained in this step influence each of the following steps.
-
Structure analysis: The structure of a document influences the way in which a document should be read. For example, there are common speaking patterns associated with paragraphs and sentences.
-
Markup support: The p and s elements defined in SSML explicitly indicate document structures that affect the speech output.
-
Non-markup behavior: In documents and parts of documents where these elements are not used, the synthesis processor is responsible for inferring the structure by automated analysis of the text, often using punctuation and other language-specific data.
-
Text normalization: All written languages have special constructs that require a conversion of the written form (orthographic form) into the spoken form. Text normalization is an automated process of the synthesis processor that performs this conversion. For example, for English, when "$200" appears in a document it may be spoken as "two hundred dollars". Similarly, "1/2" may be spoken as "half", "January second", "February first", "one of two" and so on. By the end of this step the text to be spoken has been converted completely into tokens. The exact details of what constitutes a token are language-specific. In English, tokens are usually separated by white space and are typically words. For languages with different tokenization behavior, the term "word" in this specification is intended to mean an appropriately comparable unit. Tokens in SSML cannot span markup tags except within the token and w elements. A simple English example is "cup<break/>board"; outside the token and w elements, the synthesis processor will treat this as the two tokens "cup" and "board" rather than as one token (word) with a pause in the middle. Breaking one token into multiple tokens this way will likely affect how the processor treats it.
-
Markup support: The say-as element can be used in the input document to explicitly indicate the presence and type of these constructs and to resolve ambiguities. The set of constructs that can be marked has not yet been defined but might include dates, times, numbers, acronyms, currency amounts and more. Note that many acronyms and abbreviations can be handled by the author via direct text replacement or by use of the sub element, e.g. "BBC" can be written as "B B C" and "AAA" can be written as "triple A". These replacement written forms will likely be pronounced as one would want the original acronyms to be pronounced. In the case of Japanese text, if you have a synthesis processor that supports both Kanji and kana, you may be able to use the sub element to identify whether 今日は should be spoken as きょうは ("kyou wa" = "today") or こんにちは ("konnichiwa" = "hello").
-
Non-markup behavior: For text content that is not marked with the say-as element the synthesis processor is expected to make a reasonable effort to automatically locate and convert these constructs to a speakable form. Because of inherent ambiguities (such as the "1/2" example above) and because of the wide range of possible constructs in any language, this process may introduce errors in the speech output and may cause different processors to render the same document differently.
-
Text-to-phoneme conversion: Once the synthesis processor has determined the set of tokens to be spoken, it must derive pronunciations for each token. Pronunciations may be conveniently described as sequences of phonemes, which are units of sound in a language that serve to distinguish one word from another. Each language (and sometimes each national or dialect variant of a language) has a specific phoneme set: e.g., most US English dialects have around 45 phonemes, Hawai'ian has between 12 and 18 (depending on who you ask), and some languages have more than 100! This conversion is made complex by a number of issues. One issue is that there are differences between written and spoken forms of a language, and these differences can lead to indeterminacy or ambiguity in the pronunciation of written words. For example, compared with their spoken form, words in Hebrew and Arabic are usually written with no vowels, or only a few vowels specified. In many languages the same written word may have many spoken forms. For example, in English, "read" may be spoken as "reed" (I will read the book) or "red" (I have read the book). Both human speakers and synthesis processors can pronounce these words correctly in context but may have difficulty without context (see "Non-markup behavior" below). Another issue is the handling of words with non-standard spellings or pronunciations. For example, an English synthesis processor will often have trouble determining how to speak some non-English-origin names, e.g. "Caius College" (pronounced "keys college") and President Tito (pronounced "sutto"), the president of the Republic of Kiribati (pronounced "kiribass").
-
Markup support: The phoneme element allows a phonemic sequence to be provided for any token or token sequence. This provides the content creator with explicit control over pronunciations. The say-as element might also be used to indicate that text is a proper name that may allow a synthesis processor to apply special rules to determine a pronunciation. The lexicon and lookup elements can be used to reference external definitions of pronunciations. These elements can be particularly useful for acronyms and abbreviations that the processor is unable to resolve via its own text normalization and that are not addressable via direct text substitution or the sub element (see paragraph 3, above).
-
Non-markup behavior: In the absence of a phoneme element the synthesis processor MUST apply automated capabilities to determine pronunciations. This is typically achieved by looking up tokens in a pronunciation dictionary (which may be language-dependent) and applying rules to determine other pronunciations. Synthesis processors are designed to perform text-to-phoneme conversions so most words of most documents can be handled automatically. As an alternative to relying upon the processor, authors may choose to perform some conversions themselves prior to encoding in SSML. Written words with indeterminate or ambiguous pronunciations could be replaced by words with an unambiguous pronunciation; for example, in the case of "read", "I will reed the book". Authors should be aware, however, that the resulting SSML document may not be optimal for visual display.
-
Prosody analysis: Prosody is the set of features of speech output that includes the pitch (also called intonation or melody), the timing (or rhythm), the pausing, the speaking rate, the emphasis on words and many other features. Producing human-like prosody is important for making speech sound natural and for correctly conveying the meaning of spoken language.
-
Markup support: The emphasis element, break element and prosody element may all be used by document creators to guide the synthesis processor in generating appropriate prosodic features in the speech output.
-
Non-markup behavior: In the absence of these elements, synthesis processors are expert (but not perfect) in automatically generating suitable prosody. This is achieved through analysis of the document structure, sentence syntax, and other information that can be inferred from the text input.
While most of the elements of SSML can be considered high-level in that they provide either content to be spoken or logical descriptions of style, the break and prosody elements mentioned above operate at a later point in the process and thus must coexist both with uses of the emphasis element and with the processor's own determinations of prosodic behavior. Unless specified in the appropriate sections, details of the interactions between the processor's own determinations and those provided by the author at this level are processor-specific. Authors are encouraged not to casually or arbitrarily mix these two levels of control.
-
Waveform production: The phonemes and prosodic information are used by the synthesis processor in the production of the audio waveform. There are many approaches to this processing step so there may be considerable processor-specific variation.
-
Markup support: The voice element allows the document creator to request a particular voice or specific voice qualities (e.g. a young male voice). The audio element allows for insertion of recorded audio data into the output stream, with optional control over the duration, sound level and playback speed of the recording. Rendering can be restricted to a subset of the document by using the trimming attributes on the speak element.
-
Non-markup behavior: The default volume/sound level, speed, and pitch/frequency of both voices and recorded audio in the document are that of the unmodified waveforms, whether they be voices or recordings.
1.3 Document Generation, Applications and Contexts
There are many classes of document creator that will produce marked-up documents to be spoken by a synthesis processor. Not all document creators (including human and machine) have access to information that can be used in all of the elements or in each of the processing steps described in the previous section. The following are some of the common cases.
-
The document creator has no access to information to mark up the text. All processing steps in the synthesis processor must be performed fully automatically on raw text. The document requires only the containing speak element to indicate the content is to be spoken.
-
When marked text is generated programmatically the creator may have specific knowledge of the structure and/or special text constructs in some or all of the document. For example, an email reader can mark the location of the time and date of receipt of email. Such applications may use elements that affect structure, text normalization, prosody and possibly text-to-phoneme conversion.
-
Some document creators make considerable effort to mark as many details of the document as possible to ensure consistent speech quality across platforms and to more precisely specify output qualities. In these cases, the markup may use any or all of the available elements to tightly control the speech output. For example, prompts generated in telephony and voice browser applications may be fine-tuned to maximize the effectiveness of the overall system.
-
The most advanced document creators may skip the higher-level markup (structure, text normalization, text-to-phoneme conversion, and prosody analysis) and produce low-level speech synthesis markup for segments of documents or for entire documents. This typically requires tools to generate sequences of phonemes, plus pitch and timing information. For instance, tools that do "copy synthesis" or "prosody transplant" try to emulate human speech by copying properties from recordings.
The following are important instances of architectures or designs from which marked-up synthesis documents will be generated. The language design is intended to facilitate each of these approaches.
-
Dialog language: It is a requirement that it SHOULD be possible to include documents marked with SSML into the dialog description document to be produced by the Voice Browser Working Group.
-
Interoperability with aural CSS (ACSS): Any HTML processor that is aural CSS-enabled can produce SSML. ACSS is covered in Section 19 of the Cascading Style Sheets, level 2 (CSS2) Specification [CSS2 §19]. This usage of speech synthesis facilitates improved accessibility to existing HTML and XHTML content.
-
Application-specific style sheet processing: As mentioned above,
there are classes of applications that have knowledge of text content to be spoken, and that can be incorporated into the speech synthesis markup to enhance rendering of the document. In many cases, it is expected that the application will use style sheets to perform transformations of existing XML documents to SSML. This is equivalent to the use of ACSS with HTML and once again SSML is the resulting representation to be passed to the synthesis processor. In this context, SSML may be viewed as a superset of ACSS [CSS2§19] capabilities, excepting spatial audio.
1.4 Platform-Dependent Output Behavior of SSML Content
SSML provides a standard way to specify gross properties of synthetic speech production such as pronunciation, volume, pitch, rate, etc. Exact specification of synthetic speech output behavior across disparate processors, however, is beyond the scope of this document.
Unless otherwise specified, markup values are merely indications rather than absolutes. For example, it is possible for an author to explicitly indicate the duration of a text segment and also indicate an explicit duration for a subset of that text segment. If the two durations result in a text segment that the synthesis processor cannot reasonably render, the processor is permitted to modify the durations as needed to render the text segment.
1.5 Terminology
Requirements terms- The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. However, for readability, these words do not appear in all uppercase letters in this specification.
At user option- A conforming synthesis processor MAY or MUST (depending on the modal verb in the sentence) behave as described; if it does, it MUST provide users a means to enable or disable the behavior described.
Error- Results are undefined. A conforming synthesis processor MAY detect and report an error and MAY recover from it.
Media Type- A media type (defined in [RFC2045] and [RFC2046]) specifies the nature of a linked resource. Media types are case insensitive. A list of registered media types is available for download [TYPES].
See Appendix C for information on media types for SSML.
Speech Synthesis- The process of automatic generation of speech output from data input which may include plain text, marked up text or binary objects.
Synthesis Processor- A Text-To-Speech system that accepts SSML documents as input and renders them as spoken output.
Text-To-Speech- The process of automatic generation of speech output from text or annotated text input.
URI: Uniform Resource Identifier- A global identifier in the context of the World Wide Web [WEB-ARCH]. A URI is defined as any legal
anyURI primitive as defined in XML Schema Part 2: Datatypes [SCHEMA2 §3.2.17]. For informational purposes only, [RFC3986] and [RFC2732] may be useful in understanding the structure, format, and use of URIs. Note that IRIs (see [RFC3987]) are permitted within the above definition of URI. Any relative URI reference MUST be resolved according to the rules given in Section 3.1.3.1. In this specification URIs are provided as attributes to elements, for example in the audio and lexicon elements.
Voice Browser- A device which interprets a (voice) markup language and is capable of generating voice output and/or interpreting voice input, and possibly other input/output modalities.
2. SSML Documents
2.1 Document Form
A legal stand-alone Speech Synthesis Markup Language document MUST have a legal XML Prolog [XML 1.0 or XML 1.1, as appropriate, §2.8].
The XML prolog is followed by the root speak element. See Section 3.1.1 for details on this element.
The speak element MUST designate the SSML namespace. This can be achieved by declaring an xmlns attribute or an attribute with an "xmlns" prefix. See [XMLNS 1.0 or XMLNS 1.1, as appropriate, §2] for details. Note that when the xmlns attribute is used alone, it sets the default namespace for the element on which it appears and for any child elements. The namespace for SSML is defined to be http://www.w3.org/2001/10/synthesis.
It is RECOMMENDED that the speak element also indicate the location of the appropriate SSML schema (see Appendix D) via the xsi:schemaLocation attribute from [SCHEMA1 §2.6.3]. Although such indication is not required, to encourage it this document provides such indication on all of the examples. When this attribute is not given, the Core profile [Section 2.2.5] MUST be assumed.
The following are two examples of legal SSML headers:
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xml:lang="en-US">
The meta, metadata and lexicon elements MUST occur before all other elements and text contained within the root speak element. There are no other ordering constraints on the elements in this specification.
2.2. Conformance
2.2.1 Conforming Speech Synthesis Markup Language Fragments
2.2.1.1 Conforming Core Speech Synthesis Markup Language Fragments
A document fragment is a Conforming Core Speech Synthesis Markup Language Fragment if:
- it conforms to the criteria for Conforming Stand-Alone Core Speech Synthesis Markup Language Documents after:
- with the exception of
xml:lang and xml:base , all non-synthesis namespace elements and attributes and all xmlns attributes which refer to non-synthesis namespace elements are removed from the document,
- and, if the speak element does not already designate the synthesis namespace using the
xmlns attribute, then xmlns="http://www.w3.org/2001/10/synthesis" is added to the element.
2.2.1.2 Conforming Extended Speech Synthesis Markup Language Fragments
A document fragment is a Conforming Extended Speech Synthesis Markup Language Fragment if:
- it conforms to the criteria for Conforming Stand-Alone Extended Speech Synthesis Markup Language Documents after:
- with the exception of
xml:lang and xml:base , all non-synthesis namespace elements and attributes and all xmlns attributes which refer to non-synthesis namespace elements are removed from the document,
- and, if the speak element does not already designate the synthesis namespace using the
xmlns attribute, then xmlns="http://www.w3.org/2001/10/synthesis" is added to the element.
2.2.2 Conforming Stand-Alone Speech Synthesis Markup Language Documents
2.2.2.1 Conforming Stand-Alone Core Speech Synthesis Markup Language Documents
A document is a Conforming Stand-Alone Core Speech Synthesis Markup Language Document if it meets both the following conditions:
2.2.2.2 Conforming Stand-Alone Extended Speech Synthesis Markup Language Documents
A document is a Conforming Stand-Alone Extended Speech Synthesis Markup Language Document if it meets both the following conditions:
The SSML specification and these conformance criteria provide no designated size limits on any aspect of synthesis documents. There are no maximum values on the number of elements, the amount of character data, or the number of characters in attribute values.
2.2.3 Using SSML with other Namespaces
The synthesis namespace MAY be used with other XML namespaces as per the appropriate Namespaces in XML Recommendation (1.0 [XMLNS 1.0] or 1.1 [XMLNS 1.1], depending on the version of XML being used). Future work by W3C is expected to address ways to specify conformance for documents involving multiple namespaces. Language-specific (i.e. non-SSML) elements and attributes may be inserted into SSML using an appropriate namespace. However, such content would only be rendered by a synthesis processor that supported the custom markup. Here is an example of how one might insert Ruby [RUBY] elements into SSML:
<?xml version="1.0" encoding="UTF-8"?>
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xhtml="http://www.w3.org/1999/xhtml"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="ja">
<!-- It's 20 July today. -->
<s>今日は七月
<xhtml:ruby>
<xhtml:rb>二十日</xhtml:rb>
<xhtml:rt role="alphabet:x-JEITA">ハツカ</xhtml:rt>
</xhtml:ruby>
です。
</s>
<!-- It's 20 July today. -->
<s>今日は七月
<xhtml:ruby>
<xhtml:rb>二十日</xhtml:rb>
<xhtml:rt role="alphabet:x-JEITA">ニジューニチ</xhtml:rt>
</xhtml:ruby>
です。
</s>
</speak>
2.2.4 Conforming Speech Synthesis Markup Language Processors
In a Conforming Speech Synthesis Markup Language Processor, the XML parser MUST be able to parse and process all XML constructs defined by XML 1.0 [XML 1.0] and XML 1.1 [XML 1.1] and the corresponding versions of Namespaces in XML (1.0 [XMLNS 1.0] and 1.1 [XMLNS 1.1]). This XML parser is not required to perform validation of an SSML document as per its schema or DTD; this implies that during processing of an SSML document it is OPTIONAL to apply or expand external entity references defined in an external DTD.
A Conforming Speech Synthesis Markup Language Processor MUST meet the following requirements for handling of natural (human) languages:
- A Conforming Speech Synthesis Markup Language Processor is REQUIRED to parse all legal natural language declarations successfully.
- A Conforming Speech Synthesis Markup Language Processor may be able to apply the semantics of markup languages which refer to more than one natural language. When a processor is able to support each natural language in the set but is unable to handle them concurrently it SHOULD inform the hosting environment. When the set includes one or more natural languages that are not supported by the processor it SHOULD inform the hosting environment.
- A Conforming Speech Synthesis Markup Language Processor MAY implement natural languages by approximate substitutions according to a documented, processor-specific behavior. For example, a US English synthesis processor could process British English input.
There is no conformance requirement with respect to performance characteristics of the Speech Synthesis Markup Language Processor. For instance, no statement is required regarding the accuracy, speed or other characteristics of speech produced by the processor. No statement is made regarding the size of input that a Speech Synthesis Markup Language Processor must support.
2.2.4.1 Conforming Core Speech Synthesis Markup Language Processors
A Core Speech Synthesis Markup Language processor is a Conforming Speech Synthesis Markup Language Processor that can parse and process Conforming Stand-Alone Core Speech Synthesis Markup Language documents.
A Conforming Core Speech Synthesis Markup Language Processor MUST correctly understand and apply the semantics of the elements and attributes of the Core profile as described by this document.
When a Conforming Core Speech Synthesis Markup Language Processor encounters elements or attributes other than those included in the Core profile it MAY:
- ignore the non-standard elements and/or attributes
- or, process the non-standard elements and/or attributes
- or, reject the document containing those elements and/or attributes
2.2.4.2 Conforming Extended Speech Synthesis Markup Language Processors
An Extended Speech Synthesis Markup Language processor is a Conforming Speech Synthesis Markup Language Processor that can parse and process Conforming Stand-Alone Extended Speech Synthesis Markup Language documents.
A Conforming Extended Speech Synthesis Markup Language Processor MUST correctly understand and apply the semantics of the elements and attributes of the Extended profile as described by this document.
When a Conforming Extended Speech Synthesis Markup Language Processor encounters elements or attributes other than those included in the Extended profile it MAY:
- ignore the non-standard elements and/or attributes
- or, process the non-standard elements and/or attributes
- or, reject the document containing those elements and/or attributes
An SSML Profile is a collection of SSML elements and attributes. There are only two profiles defined in this document:
- Core profile
- The Core profile consists of all elements and attributes defined in this specification except for the
clipBegin, clipEnd, repeatCount, repeatDur, soundLevel, and speed attributes on the audio element.
- Extended profile
- The Extended profile consists of all elements and attributes defined in this specification.
2.2.6 Conforming User Agent
A Conforming User Agent is a Conforming Speech Synthesis Markup Language Processor that is capable of accepting an SSML document as input and producing a spoken output by using the information contained in the markup to render the document as intended by the author. A Conforming User Agent MUST support at least one natural language.
Since the output cannot be guaranteed to be a correct representation of all the markup contained in the input there is no conformance requirement regarding accuracy. A conformance test MAY, however, require some examples of correct synthesis of a reference document to determine conformance.
2.3 Integration With Other Markup Languages
The Synchronized Multimedia Integration Language (SMIL, pronounced "smile") [SMIL3] enables simple authoring of interactive audiovisual presentations. SMIL is typically used for "rich media"/multimedia presentations which integrate streaming audio and video with images, text or any other media type. SMIL is an easy-to-learn HTML-like language, and many SMIL presentations are written using a simple text editor. See the SMIL/SSML integration examples in Appendix E.
Aural Cascading Style Sheets [CSS2 §19] are employed to augment standard visual forms of documents (like HTML) with additional elements that assist in the synthesis of the text into audio. In comparison to SSML, ACSS-generated documents are capable of more complex specifications of the audio sequence, including the designation of 3D location of the audio source. Many of the other ACSS elements overlap SSML functionality, especially in the specification of voice type/quality. SSML may be viewed as a superset of ACSS capabilities, excepting spatial audio.
The Voice Extensible Markup Language [VXML] enables Web-based development and content-delivery for interactive voice response applications (see voice browser ). VoiceXML supports speech synthesis, recording and playback of digitized audio, speech recognition, DTMF input, telephony call control, and form-driven mixed initiative dialogs. VoiceXML 2.0 extends SSML for the markup of text to be synthesized. For an example of the integration between VoiceXML and SSML see Appendix F.
2.4 Fetching SSML Documents
The fetching and caching behavior of SSML documents is defined by the environment in which the synthesis processor operates. In a VoiceXML interpreter context for example, the caching policy is determined by the VoiceXML interpreter.
3. Elements and Attributes
The following elements and attributes are defined in this specification.
3.1 Document Structure, Text Processing and Pronunciation
The Speech Synthesis Markup Language is an XML application. The root element is speak.
xml:lang is a REQUIRED attribute specifying the language of the root document.
xml:base is an OPTIONAL attribute specifying the Base URI of the root document.
onlangfailure is an OPTIONAL attribute specifying the desired behavior upon language speaking failure.
The version attribute is a REQUIRED attribute that indicates the version of the specification to be used for the document and MUST have the value "1.1".
The trimming attributes are specified in a subsection, below.
Before the speak element is executed, the synthesis processor MUST select a default voice. Note that a language speaking failure (see Section 3.1.13) will occur as soon as the first text is encountered if the language of the text is one that the default voice cannot speak. This assumes that the voice has not been changed before encountering the text, of course.
<?xml version="1.0"?>
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
... the body ...
</speak>
The speak element can only contain text to be rendered and the following elements: audio, break, emphasis, lang, lexicon, lookup, mark, meta, metadata, p, phoneme, prosody, say-as, sub, s, token, voice, w.
3.1.1.1 Trimming Attributes
Trimming attributes define the span of the document to be
rendered. Both the start and the end of the span within the speak content can be specified using marks.
The following trimming attributes are defined for speak:
| Name |
Required |
Type |
Default Value |
Description |
startmark |
false |
type xsd:token [SCHEMA2 §3.3.2] |
none |
The mark used to determined when rendering starts. |
endmark |
false |
type xsd:token [SCHEMA2 §3.3.2] |
none |
The mark used to determine when rendering ends. |
The startmark and endmark attributes specify a name that references a marker as assigned by the name attribute of the mark element. Only markers defined once in the document, i.e. that are unique, are permitted as the value of either startmark or endmark. The span of the document rendered is determined as follows:
- If the
startmark is specified, then rendering starts at the startmark. If startmark is not specified,
rendering begins at the beginning of the
document.
- If the
endmark is specified, then rendering ends at the endmark. If the endmark is not specified, rendering ends
at the document end.
- If the
startmark is after the endmark, then no audio is generated.
It is an error if the value given for either startmark or endmark is not a valid mark in the document.
Examples
If no trimming attributes are specified, then the complete document
is rendered:
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<audio src="first.wav"/>
<mark name="mark1"/>
<audio src="middle.wav"/>
<mark name="mark2"/>
<audio src="last.wav"/>
</speak>
here "first.wav", "middle.wav" and "last.wav" are rendered, where the
mark "mark2" is the last mark rendered.
The startmark can be used to specify that rendering begins from a
specific mark:
<speak startmark="mark1" version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<audio src="first.wav"/>
<mark name="mark1"/>
<audio src="middle.wav"/>
<mark name="mark2"/>
<audio src="last.wav"/>
</speak>
"middle.wav" and "last.wav" are rendered, but not "first.wav" since it
occurs before the startmark "mark1".
The end of rendering can be specified using the endmark:
<speak endmark="mark2" version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<audio src="first.wav"/>
<mark name="mark1"/>
<audio src="middle.wav"/>
<mark name="mark2"/>
<audio src="last.wav"/>
</speak>
where "first.wav" and "middle.wav" are completely rendered but none of "last.wav" is rendered.
Finally, these trimming attributes can be used to control both the
start and end of rendering:
<speak startmark="mark1" endmark="mark2"
version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<audio src="first.wav"/>
<mark name="mark1"/>
<audio src="middle.wav"/>
<mark name="mark2"/>
<audio src="last.wav"/>
</speak>
where only "middle.wav" is played.
The xml:lang attribute, as defined by XML [XML 1.0 or XML 1.1, as appropriate, §2.12], MAY be used in SSML to indicate the natural language of the written content of the element on which it occurs. BCP47 [BCP47] can help in understanding how to use this attribute.
Language information is inherited down the document hierarchy, i.e. it needs to be given only once if the whole document is in one language, and language information nests, i.e. inner attributes overwrite outer attributes.
xml:lang is a defined attribute for the speak, lang, desc, p, s, token, and w elements.
xml:lang is permitted on p, s, token, and w only because it is common to change the language at those levels.
The synthesis processor SHOULD use the value of the xml:lang attribute to assist it in determining the best way of rendering the content of the element on which it occurs. When the synthesis processor comes across text it does not know how to speak, it is the responsibility of the processor to decide what to do (see the onlangfailure attribute). One of the sources of information it can draw upon to make this decision is the value of the xml:lang attribute.
The synthesis processor may also use the value of the xml:lang attribute to help it to determine the language of the content, which may of course affect how the voice will speak the content. For example, "The French word for cat is <lang xml:lang="fr">chat</lang>, not chat." If the document author requires a new voice that is better adapted to the new language, then the synthesis processor can be explicitly requested to select a new voice by using the voice element. Further information about voice selection appears in Section 3.2.1.
The text normalization processing step may be affected by the enclosing language. This is true for both markup support by the say-as element and non-markup behavior. In the following example the same text "2/1/2000" may be read as "February first two thousand" in the first sentence, following American English pronunciation rules, but as "the second of January two thousand" in the second one, which follows Italian preprocessing rules.
<?xml version="1.0" encoding="ISO-8859-1"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<s>Today, 2/1/2000.</s>
<!-- Today, February first two thousand -->
<s xml:lang="it">Un mese fà, 2/1/2000.</s>
<!-- Un mese fà, il due gennaio duemila -->
<!-- One month ago, the second of January two thousand -->
</speak>
Relative URIs are resolved according to a base URI, which may come from a variety of sources. The base URI declaration allows authors to specify a document's base URI explicitly. See Section 3.1.3.1 for details on the resolution of relative URIs.
The base URI declaration is permitted but OPTIONAL. The two elements affected by it are
- audio
- The OPTIONAL
src attribute can specify a relative URI.
- lexicon
- The
uri attribute can specify a relative URI.
The base URI declaration follows [XML-BASE] and is indicated by an xml:base attribute on the root speak element.
<?xml version="1.0"?>
<speak version="1.1" xml:lang="en-US"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:base="http://www.example.com/base-file-path">
<?xml version="1.0"?>
<speak version="1.1" xml:lang="en-US"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:base="http://www.example.com/another-base-file-path">
3.1.3.1 Resolving Relative URIs
User agents MUST calculate the base URI for resolving relative URIs according to [RFC3986]. The following describes how RFC3986 applies to synthesis documents.
User agents MUST calculate the base URI according to the following precedences (highest priority to lowest):
- The base URI is set by the
xml:base attribute on the speak element (see Section 3.1.3).
- The base URI is given by metadata discovered during a protocol interaction, such as an HTTP header (see [RFC2616]).
- By default, the base URI is that of the current document. Not all synthesis documents have a base URI (e.g., a valid synthesis document may appear in an email and may not be designated by a URI). It is an error if such documents contain relative URIs.
3.1.4 Identifier: xml:id Attribute
The xml:id attribute [XML-ID] MAY be used in SSML to give an element an identifier that is unique to the document, allowing the element to be referenced from other documents.
xml:id is a defined attribute for the lexicon, p, s, token, and w elements.
An SSML document MAY reference one or more lexicon documents. A lexicon document is located by a URI with an OPTIONAL media type and is assigned a name that is unique in the SSML document.
Any number of lexicon elements MAY occur as immediate children of the speak element.
The lexicon element MUST have a uri attribute specifying a URI that identifies the location of the lexicon document.
The lexicon element MUST have an xml:id attribute that assigns a name to the lexicon document. The name MUST be unique to the current SSML document. The scope of this name is the current SSML document.
The lexicon element MAY have a type attribute that specifies the media type of the lexicon document. The default value of the type attribute is application/pls+xml, the media type associated with Pronunciation Lexicon Specification [PLS] documents as defined in [RFC4267].
The lexicon element MAY have a fetchtimeout attribute that specifies the timeout for fetches. The value is a Time Designation. The default value is processor-specific.
The lexicon element MAY have a maxage attribute that indicates that the document is willing to use content whose age is no greater than the specified time (cf. 'max-age' in HTTP 1.1 [RFC2616]). The value is an xsd:nonNegativeInteger [SCHEMA2 §3.3.20]. The document is not willing to use stale content, unless maxstale is also provided.
The lexicon element MAY have a maxstale attribute that indicates that the document is willing to use content that has exceeded its expiration time (cf. 'max-stale' in HTTP 1.1 [RFC2616]). The value is an xsd:nonNegativeInteger [SCHEMA2 §3.3.20]. If maxstale is assigned a value, then the document is willing to accept content that has exceeded its expiration time by no more than the specified amount of time.
The lexicon element is an empty element.
If an error occurs in fetching or parsing a lexicon document, the synthesis processor MUST notify the hosting environment that such an error has occurred. The processor MAY notify the hosting environment immediately with an asynchronous event, or the processor MAY make the error notification through its logging system. The processor SHOULD include information about the error where possible; for example, if the lexicon couldn't be fetched due to an http 404 error, that error code could be included with the notification. After notification, the processor MUST continue processing as if it had loaded an empty valid lexicon.
Details of the type attribute
Note: the description and table that follow use an imaginary vendor-specific lexicon type of x-vnd.example.lexicon. This is intended to represent whatever format is returned/available, as appropriate.
A lexicon resource indicated by a URI reference may be available in one or more media types. The SSML author can specify the preferred media type via the type attribute. When the content represented by a URI is available in many data formats, a synthesis processor MAY use the preferred type to influence which of the multiple formats is used. For instance, on a server implementing HTTP content negotiation, the processor may use the type to order the preferences in the negotiation.
Upon delivery, the resource indicated by a URI reference may be considered in terms of two types. The declared media type is the alleged value for the resource and the actual media type is the true format of its content. The actual type should be the same as the declared type, but this is not always the case (e.g. a misconfigured HTTP server might return text/plain for a document following the vendor-specific x-vnd.example.lexicon format). A specific URI scheme may require that the resource owner always, sometimes, or never return a media type. Whenever a type is returned, it is treated as authoritative. The declared media type is determined by the value returned by the resource owner or, if none is returned, by the preferred media type given in the SSML document.
Three special cases may arise. The declared type may not be supported by the processor; this is an error. The declared type may be supported but the actual type may not match; this is also an error. Finally, no media type may be declared; the behavior depends on the specific URI scheme and the capabilities of the synthesis processor. For instance, HTTP 1.1 allows document introspection (see [RFC2616 §7.2.1]), the data scheme falls back to a default media type, and local file access defines no guidelines. The following table provides some informative examples:
Media type examples
|
|
HTTP 1.1 request |
Local file access |
| Media type returned by the resource owner |
text/plain |
x-vnd.example.lexicon |
<none> |
<none> |
| Preferred media type from the SSML document |
Not applicable; the returned type is authoritative. |
x-vnd.example.lexicon |
application/pls+xml |
| Declared media type |
text/plain |
x-vnd.example.lexicon |
x-vnd.example.lexicon |
<none> |
| Behavior for an actual media type of x-vnd.example.lexicon |
This MUST be processed as text/plain. This will generate an error if text/plain is not supported or if the document does not follow the expected format. |
The declared and actual types match; success if x-vnd.example.lexicon
is supported by the synthesis processor; otherwise an error. |
Scheme specific; the synthesis processor might introspect the document to determine the type. |
The lookup element MUST have a ref attribute. The ref attribute specifies a name that references a lexicon document as assigned by the xml:id attribute of the lexicon element.
The referenced lexicon document may contain information (e.g., pronunciation) for tokens that can appear in a text to be rendered. For PLS lexicon documents, the information contained within the PLS document MUST be used by the synthesis processor when rendering tokens that appear within the context of a lookup element. For non-PLS lexicon documents, the information contained within the lexicon document SHOULD be used by the synthesis processor when rendering tokens that appear within the content of a lookup element, although the processor MAY choose not to use the information if it is deemed incompatible with the content of the SSML document. For example, a vendor-specific lexicon may be used only for particular values of the interpret-as attribute of the say-as element, or for a particular set of voices. Vendors SHOULD document the expected behavior of the synthesis processor when SSML content refers to a non-PLS lexicon.
A lookup element MAY contain other lookup elements. When a lookup element contains other lookup elements, the child lookup elements have higher precedence. Precedence means that a token is first looked up in the lexicon with highest precedence. Only if the token is not found in that lexicon is it then looked up in the lexicon with the next lower precedence, and so on until the token is successfully found or until all lexicons have been used for lookup. It is assumed that the synthesis processor already has one or more built-in system lexicons which will be treated as having a lower precedence than those specified using the lexicon and lookup elements. Note that if a token is not within the scope of at least one lookup element, then the token can only be looked up in the built-in system lexicons.
The lookup element can only contain text to be rendered and the following elements: audio, break, emphasis, lang, lookup, mark, p, phoneme, prosody, say-as, sub, s, token, voice, w.
<?xml version="1.0"?>
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<lexicon uri="http://www.example.com/lexicon.pls"
xml:id="pls"/>
<lexicon uri="http://www.example.com/strange-words.file"
xml:id="sw"
type="media-type"/>
<lookup ref="pls">
tokens here are looked up in lexicon.pls
<lookup ref="sw">
tokens here are looked up first in strange-words.file and then, if not found, in lexicon.pls
</lookup>
tokens here are looked up in lexicon.pls
</lookup>
tokens here are not looked up in lexicon documents
...
</speak>
The metadata and meta elements are containers in which information about the document can be placed. The metadata element provides more general and powerful treatment of metadata information than meta by using a metadata schema.
A meta declaration associates a string to a declared meta property or declares "http-equiv" content. Either a name or http-equiv attribute is REQUIRED. It is an error to provide both name and http-equiv attributes. A content attribute is REQUIRED. The seeAlso property is the only defined meta property name. It is used to specify a resource that might provide additional metadata information about the content. This property is modeled on the seeAlso property of Resource Description Framework (RDF) Schema Specification 1.0 [RDF-SCHEMA §5.4.1]. The http-equiv attribute has a special significance when documents are retrieved via HTTP. Although the preferred method of providing HTTP header information is by using HTTP header fields, the "http-equiv" content MAY be used in situations where the SSML document author is unable to configure HTTP header fields associated with their document on the origin server, for example, cache control information. Note that HTTP servers and caches are not required to introspect the contents of meta in SSML documents and thereby override the header values they would send otherwise.
Informative: This is an example of how meta elements can be included in an SSML document to specify a resource that provides additional metadata information and also indicate that the document must not be cached.
<?xml version="1.0"?>
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<meta name="seeAlso" content="http://example.com/my-ssml-metadata.xml"/>
<meta http-equiv="Cache-Control" content="no-cache"/>
</speak>
The meta element is an empty element.
The metadata element is a container in which information about the document can be placed using a metadata schema. Although any metadata schema can be used with metadata, it is RECOMMENDED that the XML syntax of the Resource Description Framework (RDF) [RDF-XMLSYNTAX] be used in conjunction with the general metadata properties defined in the Dublin Core Metadata Initiative [DC].
The Resource Description Format [RDF] is a declarative language and provides a standard way for using XML to represent metadata in the form of statements about properties and relationships of items on the Web. Content creators should refer to W3C metadata Recommendations [RDF-XMLSYNTAX] and [RDF-SCHEMA] when deciding which metadata RDF schema to use in their documents. Content creators should also refer to the Dublin Core Metadata Initiative [DC], which is a set of generally applicable core metadata properties (e.g., Title, Creator, Subject, Description, Rights, etc.).
Document properties declared with the metadata element can use any metadata schema.
Informative: This is an example of how metadata can be included in an SSML document using the Dublin Core version 1.0 RDF schema [DC] describing general document information such as title, description, date, and so on:
<?xml version="1.0"?>
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<metadata>
<rdf:RDF
xmlns:rdf = "http://www.w3.org/1999/02/22-rdf-syntax-ns#"
xmlns:rdfs = "http://www.w3.org/2000/01/rdf-schema#"
xmlns:dc = "http://purl.org/dc/elements/1.1/">
<!-- Metadata about the synthesis document -->
<rdf:Description rdf:about="http://www.example.com/meta.ssml"
dc:title="Hamlet-like Soliloquy"
dc:description="Aldine's Soliloquy in the style of Hamlet"
dc:publisher="W3C"
dc:language="en-US"
dc:date="2002-11-29"
dc:rights="Copyright 2002 Aldine Turnbet"
dc:format="application/ssml+xml" >
<dc:creator>
<rdf:Seq ID="CreatorsAlphabeticalBySurname">
<rdf:li>William Shakespeare</rdf:li>
<rdf:li>Aldine Turnbet</rdf:li>
</rdf:Seq>
</dc:creator>
</rdf:Description>
</rdf:RDF>
</metadata>
</speak>
The metadata element can have arbitrary content, although none of the content will be rendered by the synthesis processor.
3.1.8 Text Structure
A p element represents a paragraph. An s element represents a sentence.
xml:lang, xml:id, and onlangfailure are defined attributes on the p and s elements.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<p>
<s>This is the first sentence of the paragraph.</s>
<s>Here's another sentence.</s>
</p>
</speak>
The use of p and s elements is OPTIONAL. Where text occurs without an enclosing p or s element the synthesis processor SHOULD attempt to determine the structure using language-specific knowledge of the format of plain text.
The p element can only contain text to be rendered and the following elements: audio, break, emphasis, lang, lookup, mark, phoneme, prosody, say-as, sub, s, token, voice, w.
The s element can only contain text to be rendered and the following elements: audio, break, emphasis, lang, lookup, mark, phoneme, prosody, say-as, sub, token, voice, w.
The token element allows the author to indicate its content is a token and to eliminate token (word) segmentation ambiguities of the synthesis processor.
The token element is necessary in order to render languages
- that do not use white space as a token boundary identifier, such as Chinese, Thai, and Japanese
- that use white space for syllable segmentation, such as Vietnamese
- that use white space for other purposes, such as Urdu
Use of this element can result in improved cues for prosodic control (e.g., pause) and may assist the synthesis processor in selection of the correct pronunciation for homographs. Other elements such as break, mark, and prosody are permitted within token to allow annotation at a sub-token level (e.g., syllable, mora, or whatever units are reasonable for the current language). Synthesis processors are REQUIRED to parse these annotations and MAY render them as they are able.
The text contents of the token element and its subelements are together considered to be one token for lexical lookup purposes as follows:
- All markup within the token element is removed (leaving the contents of the markup).
- All remaining text is concatenated together in the order in which it appears in the document.
- Leading and trailing spaces are removed from this single block of text.
- Multiple contiguous white space characters are converted into a single space.
- The result is treated as a single token for lexical lookup purposes.
Thus, "<token><emphasis>hap</emphasis>py</token>" and "<token><emphasis> hap </emphasis> py</token>" would refer to the tokens "happy" and "hap py", respectively. Note that this is different from how text and markup outside a token element are treated (see "Text normalization" in Section 1.2).
The use of token elements is OPTIONAL. Where text occurs without an enclosing token element the synthesis processor SHOULD attempt to determine the token segmentation using language-specific knowledge of the format of plain text.
xml:lang is a defined attribute on the token element to identify the written language of the content.
xml:id is a defined attribute on the token element.
onlangfailure is an OPTIONAL attribute specifying the desired behavior upon language speaking failure.
role is an OPTIONAL defined attribute on the token element. The role attribute takes as its value one or more white space separated QNames (as defined in Section 4 of Namespaces in XML (1.0 [XMLNS 1.0] or 1.1 [XMLNS 1.1], depending on the version of XML being used)). A QName
in the attribute content is expanded into an expanded-name
using the namespace declarations in scope for the containing token element.
Thus, each QName provides a reference to a specific item in the
designated namespace. In the second example below, the QName within the
role attribute expands to the "VV0" item in the
"http://www.example.com/claws7tags" namespace.
This mechanism allows for referencing defined taxonomies of word
classes, with the expectation that they are documented at the
specified namespace URI.
The role attribute is intended to be of use in synchronizing with other specifications, for example to describe additional information to help the selection of the most appropriate pronunciation for the contained text inside an external lexicon (see lexicon documents).
The token element can only contain text to be rendered and the following elements: audio, break, emphasis, mark, phoneme, prosody, say-as, sub.
The token element can only be contained in the following elements: audio, emphasis, lang, lookup, prosody, speak, p, s, voice.
The w element is an alias for the token element.
Here is an example showing the use of the token element.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="zh-CN">
<!-- The Nanjing Changjiang River Bridge -->
<token>南京市</token><token>长江大桥</token>
<!-- The mayor of Nanjing city, Jiang Daqiao -->
南京市长<w>江大桥</w>
<!-- Shanghai is a metropolis -->
上海是个<w>大都会</w>
<!-- Most Shanghainese will say something like that -->
上海人<w>大都</w>会那么说
</speak>
The next example shows the use of the role attribute. The first document below is a sample lexicon (PLS) for the Chinese word "处". The second references this lexicon and shows how the role attribute may be used to select the appropriate pronunciation of the Chinese word "处" in the dialog.
<?xml version="1.0" encoding="UTF-8"?>
<lexicon version="1.0"
xmlns="http://www.w3.org/2005/01/pronunciation-lexicon"
xmlns:claws="http://www.example.com/claws7tags"
alphabet="x-myorganization-pinyin"
xml:lang="zh-CN">
<lexeme role="claws:VV0">
<!-- base form of lexical verb -->
<grapheme>处</grapheme>
<phoneme>chu3</phoneme>
<!-- pinyin string is: "chǔ" in 处罚 处置 -->
</lexeme>
<lexeme role="claws:NN">
<!-- common noun, neutral for number -->
<grapheme>处</grapheme>
<phoneme>chu4</phoneme>
<!-- pinyin string is: "chù" in 处所 妙处 -->
</lexeme>
</lexicon>
<?xml version="1.0" encoding="UTF-8"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xmlns:claws="http://www.example.com/claws7tags"
xml:lang="zh-CN">
<lexicon uri="http://www.example.com/lexicon.pls"
type="application/pls+xml"
xml:id="mylex"/>
<lookup ref="mylex">
他这个人很不好相<w role="claws:VV0">处</w>。
此<w role="claws:NN">处</w>不准照相。
</lookup>
</speak>
The say-as element allows the author to indicate information on the type of text construct contained within the element and to help specify the level of detail for rendering the contained text.
Defining a comprehensive set of text format types is difficult because of the variety of languages that have to be considered and because of the innate flexibility of written languages. SSML only specifies the say-as element, its attributes, and their purpose. It does not enumerate the possible values for the attributes. The Working Group expects to produce a separate document that will define standard values and associated normative behavior for these values. Examples given here are only for illustrating the purpose of the element and the attributes.
The say-as element has three attributes: interpret-as, format, and detail. The interpret-as attribute is always REQUIRED; the other two attributes are OPTIONAL. The legal values for the format attribute depend on the value of the interpret-as attribute.
The say-as element can only contain text to be rendered.
The interpret-as and format attributes
The interpret-as attribute indicates the content type of the contained text construct. Specifying the content type helps the synthesis processor to distinguish and interpret text constructs that may be rendered in different ways depending on what type of information is intended. In addition, the OPTIONAL format attribute can give further hints on the precise formatting of the contained text for content types that may have ambiguous formats.
When specified, the interpret-as and format values are to be interpreted by the synthesis processor as hints provided by the markup document author to aid text normalization and pronunciation.
In all cases, the text enclosed by any say-as element is intended to be a standard, orthographic form of the language currently in context. A synthesis processor SHOULD be able to support the common, orthographic forms of the specified language for every content type that it supports.
When the value for the interpret-as attribute is unknown or unsupported by a processor, it MUST render the contained text as if no interpret-as value were specified.
When the value for the format attribute is unknown or unsupported by a processor, it MUST render the contained text as if no format value were specified, and SHOULD render it using the interpret-as value that is specified.
When the content of the say-as element contains additional text next to the content that is in the indicated format and interpret-as type, then this additional text MUST be rendered. The processor MAY make the rendering of the additional text dependent on the interpret-as type of the element in which it appears.
When the content of the say-as element contains no content in the indicated interpret-as type or format, the processor MUST render the content either as if the format attribute were not present, or as if the interpret-as attribute were not present, or as if neither the format nor interpret-as attributes were present. The processor SHOULD also notify the environment of the mismatch.
Indicating the content type or format does not necessarily affect the way the information is pronounced. A synthesis processor SHOULD pronounce the contained text in a manner in which such content is normally produced for the language.
The detail attribute
The detail attribute is an OPTIONAL attribute that indicates the level of detail to be read aloud or rendered. Every value of the detail attribute MUST render all of the informational content in the contained text; however, specific values for the detail attribute can be used to render content that is not usually informational in running text but may be important to render for specific purposes. For example, a synthesis processor will usually render punctuations through appropriate changes in prosody. Setting a higher level of detail may be used to speak punctuations explicitly, e.g. for reading out coded part numbers or pieces of software code.
The detail attribute can be used for all interpret-as types.
If the detail attribute is not specified, the level of detail that is produced by the synthesis processor depends on the text content and the language.
When the value for the detail attribute is unknown or unsupported by a processor, it MUST render the contained text as if no value were specified for the detail attribute.
The phoneme element provides a phonemic/phonetic pronunciation for the contained text. The phoneme element MAY be empty. However, it is RECOMMENDED that the element contain human-readable text that can be used for non-spoken rendering of the document. For example, the content may be displayed visually for users with hearing impairments.
The ph attribute is a REQUIRED attribute that specifies the phoneme/phone string.
This element is designed strictly for phonemic and phonetic notations and is intended to be used to provide pronunciations for words or very short phrases. The phonemic/phonetic string does not undergo text normalization and is not treated as a token for lookup in the lexicon (see Section 3.1.5), while values in say-as and sub may undergo both. Briefly, phonemic strings consist of phonemes, language-dependent speech units that characterize linguistically significant differences in the language; loosely, phonemes represent all the sounds needed to distinguish one word from another in a given language. On the other hand, phonetic strings consist of phones, speech units that characterize the manner (puff of air, click, vocalized, etc.) and place (front, middle, back, etc.) of articulation within the human vocal tract and are thus independent of language; phones represent realized distinctions in human speech production.
The alphabet attribute is an OPTIONAL attribute that specifies the phonemic/phonetic pronunciation alphabet. A pronunciation alphabet in this context refers to a collection of symbols to represent the sounds of one or more human languages. The only valid values for this attribute are "ipa" (see the next paragraph), values defined in the Pronunciation Alphabet Registry and vendor-defined strings of the form "x-organization" or "x-organization-alphabet". For example, the Japan Electronics and Information Technology Industries Association [JEITA] might wish to encourage the use of an alphabet such as "x-JEITA" or "x-JEITA-IT-4002" for their phoneme alphabet [JEIDAALPHABET].
Synthesis processors SHOULD support a value for alphabet of "ipa", corresponding to Unicode representations of the phonetic characters developed by the International Phonetic Association [IPA]. In addition to an exhaustive set of vowel and consonant symbols, this character set supports a syllable delimiter, numerous diacritics, stress symbols, lexical tone symbols, intonational markers and more. For this alphabet, legal ph values are strings of the values specified in Appendix 2 of [IPAHNDBK]; note that an IPA transcription may contain white space characters to assist readability, which have no implications for the pronunciation. Informative tables of the IPA-to-Unicode mappings can be found at [IPAUNICODE1] and [IPAUNICODE2]. Note that not all of the IPA characters are available in Unicode. For processors supporting this alphabet,
- The processor MUST syntactically accept all legal
ph values.
- The processor SHOULD produce output when given Unicode IPA codes that can reasonably be considered to belong to the current language.
- The production of output when given other codes is entirely at processor discretion.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<phoneme alphabet="ipa" ph="təmei̥ɾou̥"> tomato </phoneme>
<!-- This is an example of IPA using character entities -->
<!-- Because many platform/browser/text editor combinations do not
correctly cut and paste Unicode text, this example uses the entity
escape versions of the IPA characters. Normally, one would directly
use the UTF-8 representation of these symbols: "təmei̥ɾou̥". -->
</speak>
It is an error if a value for alphabet is specified that is not known or cannot be applied by a synthesis processor. The default behavior when the alphabet attribute is left unspecified is processor-specific.
The type attribute is an optional attribute that indicates additional information about how the pronunciation information is to be interpreted. The only allowed values for this attribute are "default", which has no implications, and "ruby", which indicates that the pronunciation information is from ruby text [RUBY]. The default value of this attribute is "default".
The phoneme element itself can only contain text (no elements).
3.1.10.1 Pronunciation Alphabet Registry
Links to the Pronunciation Alphabet Registry can be found on the SSML namespace page at http://www.w3.org/2001/10/synthesis.
The sub element is employed to indicate that the text in the alias attribute value replaces the contained text for pronunciation. This allows a document to contain both a spoken and written form. The REQUIRED alias attribute specifies the string to be spoken instead of the enclosed string. The processor SHOULD apply text normalization to the alias value.
The sub element can only contain text (no elements).
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<sub alias="World Wide Web Consortium">W3C</sub>
<!-- World Wide Web Consortium -->
</speak>
The lang element is used to specify the natural language of the content.
xml:lang is a REQUIRED attribute specifying the language of the root document.
onlangfailure is an OPTIONAL attribute specifying the desired behavior upon language speaking failure.
This element MAY be used when there is a change in the natural language. There is no text structure associated with the language change indicated by the lang element. It MAY be used to specify the language of the content at a level other than a paragraph, sentence or word level. When language change is to be associated with text structure, it is RECOMMENDED to use the xml:lang attribute on the respective p, s, token, or w element.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
The French word for cat is <w xml:lang="fr">chat</w>.
He prefers to eat pasta that is <lang xml:lang="it">al dente</lang>.
</speak>
The lang element can only contain text to be rendered and the following elements: audio, break, emphasis, lang, lookup, mark, p, phoneme, prosody, say-as, sub, s, token, voice, w.
The onlangfailure attribute is an OPTIONAL attribute that contains one value from the following enumerated list describing the desired behavior of the synthesis processor upon language speaking failure. A conforming synthesis processor MUST report a language speaking failure in addition to taking the action(s) below.
- changevoice - if a voice exists that can speak the language, the synthesis processor will switch to that voice and speak the content. Otherwise, the processor chooses another behavior (either ignoretext or ignorelang).
- ignoretext - the synthesis processor will not attempt to render the text that is in the failed language.
- ignorelang - the synthesis processor will ignore the change in language and speak as if the content were in the previous language.
- processorchoice - the synthesis processor chooses the behavior (either changevoice, ignoretext, or ignorelang).
A language speaking failure occurs whenever the synthesis processor decides that the currently-selected voice (see Section 3.2.1) cannot speak the declared language of the text. This can occur when the synthesis processor encounters a new xml:lang value or characters or character sequences that the voice does not know how to process.
The value of this attribute is inherited down the document hierarchy, i.e. it needs to be given only once if the desired behavior for the whole document is the same, and settings of this value nest, i.e. inner attributes overwrite outer attributes. The top-level default value for this attribute is "processorchoice". Other languages which embed fragments of SSML (without a speak element) MUST declare the top-level default value for this attribute.
onlangfailure is permitted on all elements which can contain xml:lang, so it is a defined attribute for the speak, lang, desc, p, s, token, and w elements.
3.2 Prosody and Style
The voice element is a production element that requests a change in speaking voice. There are two kinds of attributes for the voice element: those that indicate desired features of a voice and those that control behavior. The voice feature attributes are:
-
gender: OPTIONAL attribute indicating the preferred gender of the voice to speak the contained text. Enumerated values are: "male", "female", "neutral", or the empty string "".
-
age: OPTIONAL attribute indicating the preferred age in years (since birth) of the voice to speak the contained text. Acceptable values are of type xsd:nonNegativeInteger [SCHEMA2 §3.3.20] or the empty string "".
-
variant: OPTIONAL attribute indicating a preferred variant of the other voice characteristics to speak the contained text. (e.g. the second male child voice). Valid values of variant are of type xsd:positiveInteger [SCHEMA2 §3.3.25] or the empty string "".
-
name: OPTIONAL attribute indicating a processor-specific voice name to speak the contained text. The value MAY be a space-separated list of names ordered from top preference down or the empty string "". As a result a name MUST NOT contain any white space.
-
languages: OPTIONAL attribute indicating the list of languages the voice is desired to speak. The value MUST be either the empty string "" or a space-separated list of languages, with OPTIONAL accent indication per language. Each language/accent pair is of the form "language" or "language:accent", where both language and accent MUST be an Extended Language Range [BCP47, Matching of Language Tags §2.2], except that the values "und" and "zxx" are disallowed. A voice satisfies the languages feature if, for each language/accent pair in the list,
- the voice is documented (see Voice descriptions) as reading/speaking a language that matches the Extended Language Range given by language according to the Extended Filtering matching algorithm [BCP47, Matching of Language Tags §3.3.2], and
- if an accent is given, the voice is documented (see Voice descriptions) as reading/speaking the language above with an accent that matches the Extended Language Range given by accent according to the Extended Filtering matching algorithm [BCP47, Matching of Language Tags §3.3.2], except that the script and extension subtags of the accent MUST be ignored by the synthesis processor. It is recommended that authors and voice providers do not use the script or extension subtags for accents because they are not relevant for speaking.
For example, a languages value of "en:pt fr:ja" can legally be matched by any voice that can both read English (speaking it with a Portuguese accent) and read French (speaking it with a Japanese accent). Thus, a voice that only supports "en-US" with a "pt-BR" accent and "fr-CA" with a "ja" accent would match. As another example, if we have <voice languages="fr:pt"> and there is no voice that supports French with a Portuguese accent, then a voice selection failure will occur. Note that if no accent indication is given for a language, then any voice that speaks the language is acceptable, regardless of accent. Also, note that author control over language support during voice selection is independent of any value of xml:lang in the text.
For the feature attributes above, an empty string value indicates that any voice will satisfy the feature. The top-level default value for all feature attributes is "", the empty string.
The behavior control attributes of voice are:
required: OPTIONAL attribute that specifies a set of features by their respective attribute names. This set of features is used by the voice selection algorithm described below. Valid values of required are a space-separated list composed of values from the list of feature names: "name", "languages", "gender", "age", "variant" or the empty string "". The default value for this attribute is "languages". ordering: OPTIONAL attribute that specifies the priority ordering of features. Valid values of ordering are a space-separated list composed of values from the list of feature names: "name", "languages", "gender", "age", "variant" or the empty string "", where features named earlier in the list have higher priority . The default value for this attribute is "languages". Features not listed in the ordering list have equal priority to each other but lower than that of the last feature in the list. Note that if the ordering attribute is set to the empty string then all features have the same priority.onvoicefailure: OPTIONAL attribute containing one value from the following enumerated list describing the desired behavior of the synthesis processor upon voice selection failure. The default value for this attribute is "priorityselect".
- priorityselect - the synthesis processor uses the values of all voice feature attributes to select a voice by feature priority, where the starting candidate set is the set of all available voices.
- keepexisting - the voice does not change.
- processorchoice - the synthesis processor chooses the behavior (either priorityselect or keepexisting).
The following voice selection algorithm MUST be used:
- All available voices are identified for which the values of all voice feature attributes listed in the
required attribute value are matched. When the value of the required attribute is the empty string "", any and all voices are considered successful matches. If one or more voices are identified, the selection is considered successful; otherwise there is voice selection failure.
- If a successful selection identifies only one voice, the synthesis processor MUST use that voice.
- If a successful selection identifies more than one voice, the remaining features (those not listed in the
required attribute value) are used to choose a voice by feature priority, where the starting candidate set is the set of all voices identified.
- If there is voice selection failure, a conforming synthesis processor MUST report the voice selection failure in addition to taking the action(s) expressed by the value of the
onvoicefailure attribute.
- To choose a voice by feature priority, each feature is taken in turn starting with the highest priority feature, as controlled by the
ordering attribute.
- If at least one voice matches the value of the current voice feature attribute then all voices not matching that value are removed from the candidate set. If a single voice remains in the candidate set the synthesis processor must use it. If more than one voice remains in the candidate set then the next priority feature is examined for the candidate set.
- If no voices match the value of the current voice feature attribute then the next priority feature is examined for the candidate set.
- After examining all feature attributes on the
ordering list, if multiple voices remain in the candidate set, the synthesis processor MUST use any one of them.
Although each attribute individually is optional, it is an error if no attributes are specified when the voice element is used.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<voice gender="female" languages="en-US" required="languages gender variant">Mary had a little lamb,</voice>
<!-- now request a different female child's voice -->
<voice gender="female" variant="2">
Its fleece was white as snow.
</voice>
<!-- processor-specific voice selection -->
<voice name="Mike" required="name">I want to be like Mike.</voice>
</speak>
Voice descriptions
For every voice made available to a synthesis processor, the vendor of the voice must document the following:
Although indication of language (using xml:lang) and selection of voice (using voice) are independent, there is no requirement that a synthesis processor support every possible combination of values of the two. However, a synthesis processor MUST document expected rendering behavior for every possible combination. See the onlangfailure attribute for information on what happens when the processor encounters text content that the voice cannot speak.
voice attributes are inherited down the tree including to within elements that change the language. The defaults described for each attribute only apply at the top (document) level and are overridden by explicit author use of the voice element. In addition, changes in voice are scoped and apply only to the content of the element in which the change occurred. When processing reaches the end of a voice element content, i.e. the closing </voice> tag, the voice in effect before the beginning tag is restored.
Similarly, if a voice is changed by the processor as a result of a language speaking failure, the prior voice is restored when that voice is again able to speak the content. Note that there is always an active voice, since the synthesis processor is required to select a default voice before beginning execution of the document (see section 3.1.1).
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<voice gender="female" required="languages gender age" languages="en-US ja">
Any female voice here.
<voice age="6">
A female child voice here.
<lang xml:lang="ja">
<!-- Same female child voice rendering Japanese text. -->
</lang>
</voice>
</voice>
</speak>
Relative changes in prosodic parameters SHOULD be carried across voice changes. However, different voices have different natural defaults for pitch, speaking rate, etc. because they represent different personalities, so absolute values of the prosodic parameters may vary across changes in the voice.
The quality of the output audio or voice may suffer if a change in voice is requested within a sentence.
The voice element can only contain text to be rendered and the following elements: audio, break, emphasis, lang, lookup, mark, p, phoneme, prosody, say-as, sub, s, token, voice, w.
The emphasis element requests that the contained text be spoken with emphasis (also referred to as prominence or stress). The synthesis processor determines how to render emphasis since the nature of emphasis differs between languages, dialects or even voices. The attributes are:
-
level: the OPTIONAL level attribute indicates the strength of emphasis to be applied. Defined values are "strong", "moderate", "none" and "reduced". The default level is "moderate". The meaning of "strong" and "moderate" emphasis is interpreted according to the language being spoken (languages indicate emphasis using a possible combination of pitch change, timing changes, loudness and other acoustic differences). The "reduced" level is effectively the opposite of emphasizing a word. For example, when the phrase "going to" is reduced it may be spoken as "gonna". The "none" level is used to prevent the synthesis processor from emphasizing words that it might typically emphasize. The values "none", "moderate", and "strong" are monotonically non-decreasing in strength.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
That is a <emphasis> big </emphasis> car!
That is a <emphasis level="strong"> huge </emphasis>
bank account!
</speak>
The emphasis element can only contain text to be rendered and the following elements: audio, break, emphasis, lang, lookup, mark, phoneme, prosody, say-as, sub, token, voice, w.
The break element is an empty element that controls the pausing or other prosodic boundaries between tokens. The use of the break element between any pair of tokens is OPTIONAL. If the element is not present between tokens, the synthesis processor is expected to automatically determine a break based on the linguistic context. In practice, the break element is most often used to override the typical automatic behavior of a synthesis processor. The attributes on this element are:
-
strength: the strength attribute is an OPTIONAL attribute having one of the following values: "none", "x-weak", "weak", "medium" (default value), "strong", or "x-strong". This attribute is used to indicate the strength of the prosodic break in the speech output. The value "none" indicates that no prosodic break boundary should be outputted, which can be used to prevent a prosodic break which the processor would otherwise produce. The other values indicate monotonically non-decreasing (conceptually increasing) break strength between tokens. The stronger boundaries are typically accompanied by pauses. "x-weak" and "x-strong" are mnemonics for "extra weak" and "extra strong", respectively.
-
time: the time attribute is an OPTIONAL attribute indicating the duration of a pause to be inserted in the output in seconds or milliseconds. It follows the time value format from the Cascading Style Sheets Level 2 Recommendation [CSS2], e.g. "250ms", "3s".
The strength attribute is used to indicate the prosodic strength of the break. For example, the breaks between paragraphs are typically much stronger than the breaks between words within a sentence. The synthesis processor MAY insert a pause as part of its implementation of the prosodic break. A pause of a specific length can also be inserted by using the time attribute.
If a break element is used with neither strength nor time attributes, a break will be produced by the processor with a prosodic strength greater than that which the processor would otherwise have used if no break element was supplied.
If both strength and time attributes are supplied, the processor will insert a break with a duration as specified by the time attribute, with other prosodic changes in the output based on the value of the strength attribute.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
Take a deep breath <break/>
then continue.
Press 1 or wait for the tone. <break time="3s"/>
I didn't hear you! <break strength="weak"/> Please repeat.
</speak>
The prosody element permits control of the pitch, speaking rate and volume of the speech output. The attributes, all OPTIONAL, are:
-
pitch: the baseline pitch for the contained text. Although the exact meaning of "baseline pitch" will vary across synthesis processors, increasing/decreasing this value will typically increase/decrease the approximate pitch of the output. Legal values are: a number followed by "Hz", a relative change or "x-low", "low", "medium", "high", "x-high", or "default". Labels "x-low" through "x-high" represent a sequence of monotonically non-decreasing pitch levels.
-
contour: sets the actual pitch contour for the contained text. The format is specified in Pitch contour below.
-
range: the pitch range (variability) for the contained text. Although the exact meaning of "pitch range" will vary across synthesis processors, increasing/decreasing this value will typically increase/decrease the dynamic range of the output pitch. Legal values are: a number followed by "Hz", a relative change or "x-low", "low", "medium", "high", "x-high", or "default". Labels "x-low" through "x-high" represent a sequence of monotonically non-decreasing pitch ranges.
-
rate: a change in the speaking rate for the contained text. Legal values are: a non-negative percentage or "x-slow", "slow", "medium", "fast", "x-fast", or "default". Labels "x-slow" through "x-fast" represent a sequence of monotonically non-decreasing speaking rates. When the value is a non-negative percentage it acts as a multiplier of the default rate. For example, a value of 100% means no change in speaking rate, a value of 200% means a speaking rate twice the default rate, and a value of 50% means a speaking rate of half the default rate. The default rate for a voice depends on the language and dialect and on the personality of the voice. The default rate for a voice SHOULD be such that it is experienced as a normal speaking rate for the voice when reading aloud text. Since voices are processor-specific, the default rate will be as well.
-
duration: a value in seconds or milliseconds for the desired time to take to read the contained text. Follows the time value format from the Cascading Style Sheet Level 2 Recommendation [CSS2], e.g. "250ms", "3s".
-
volume: the volume for the contained text. Legal values are: a number preceded by "+" or "-" and immediately followed by "dB"; or "silent", "x-soft", "soft", "medium", "loud", "x-loud", or "default". The default is +0.0dB. Specifying a value of "silent" amounts to specifying minus infinity decibels (dB). Labels "silent" through "x-loud" represent a sequence of monotonically non-decreasing volume levels. When the value is a signed number (dB), it specifies the ratio of the squares of the new signal amplitude (a1) and the current amplitude (a0), and is defined in terms of dB:
volume(dB) = 20 log10 (a1 / a0)
Note that all numerical volume levels (in dB) are relative to the current level and that they are always signed (including zero). Also note that once the current volume level is set to "silent" all child relative changes also result in silence. A child prosody element MAY use the label "default" to reset the current volume level.
So that for a value of:
- "silent", the contained text is read silently;
- '-6.0dB', the contained text is read at approximately half the amplitude of the current signal amplitude;
- '-0dB', the contained text is read with no relative change in volume;
- '+6.0dB', the contained text is read at approximately twice the amplitude of the current signal amplitude.
Note that the behavior of this attribute for label values may differ from that of numerical values. Use of a numerical value causes direct modification of the waveform, while use of a label value may result in prosodic modifications that more accurately reflect how a human being would increase or decrease the perceived loudness of his speech, e.g., adjusting frequency and power differently for different sound units.
Although each attribute individually is optional, it is an error if no attributes are specified when the prosody element is used. The "x-foo" attribute value names are intended to be mnemonics for "extra foo". All units ("Hz", "st") are case-sensitive. Note also that customary pitch levels and standard pitch ranges may vary significantly by language, as may the meanings of the labelled values for pitch targets and ranges.
Here is an example of how to use the volume attribute:
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<s>I am speaking this at the default volume for this voice.</s>
<s><prosody volume="+6dB">
I am speaking this at approximately twice the original signal amplitude.
</prosody></s>
<s><prosody volume="-6dB">
I am speaking this at approximately half the original signal amplitude.
</prosody></s>
</speak>
A number is a simple positive floating point value without exponentials. Legal formats are "n", "n.", ".n" and "n.n" where "n" is a sequence of one or more digits.
A non-negative percentage is an unsigned number immediately followed by "%".
Relative changes for the attributes above can be specified
- as a percentage (a number preceded by "+" or "-" and followed by "%"), e.g. "+15.2%", "-8.0%", or
- as a relative number:
- For the
pitch and range attributes, relative changes can be given in semitones (a number preceded by "+" or "-" and followed by "st") or in Hertz (a number preceded by "+" or "-" and followed by "Hz"): "+0.5st", "+5st", "-2st", "+10Hz", "-5.5Hz". A semitone is half of a tone (a half step) on the standard diatonic scale.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
The price of XYZ is <prosody rate="90%">$45</prosody>
</speak>
The pitch contour is defined as a set of white space-separated targets at specified time positions in the speech output. The algorithm for interpolating between the targets is processor-specific. In each pair of the form (time position,target), the first value is a percentage of the period of the contained text (a number followed by "%") and the second value is the value of the pitch attribute (a number followed by "Hz", a relative change, or a label value). Time position values outside 0% to 100% are ignored. If a pitch value is not defined for 0% or 100% then the nearest pitch target is copied. All relative values for the pitch are relative to the pitch value just before the contained text.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<prosody contour="(0%,+20Hz) (10%,+30%) (40%,+10Hz)">
good morning
</prosody>
</speak>
The duration attribute takes precedence over the rate attribute. The contour attribute takes precedence over the pitch and range attributes.
The default value of all prosodic attributes is no change. For example, omitting the rate attribute means that the rate is the same within the element as outside.
The prosody element can only contain text to be rendered and the following elements: audio, break, emphasis, lang, lookup, mark, p, phoneme, prosody, say-as, sub, s, token, voice, w.
Limitations
All prosodic attribute values are indicative. If a synthesis processor is unable to accurately render a document as specified (e.g., trying to set the pitch to 1 MHz or the speaking rate to 1,000,000 words per minute), it MUST make a best effort to continue processing by imposing a limit or a substitute for the specified, unsupported value and MAY inform the host environment when such limits are exceeded.
In some cases, synthesis processors MAY elect to ignore a given prosodic markup if the processor determines, for example, that the indicated value is redundant, improper or in error. In particular, concatenative-type synthetic speech systems that employ large acoustic units MAY reject prosody-modifying markup elements if they are redundant with the prosody of a given acoustic unit(s) or would otherwise result in degraded speech quality.
3.3 Other Elements
The audio element supports the insertion of recorded audio files (see Appendix A for REQUIRED formats) and the insertion of other audio formats in conjunction with synthesized speech output. The audio element MAY be empty. If the audio element is not empty then the contents should be the marked-up text to be spoken if the audio document is not available. The alternate content MAY include text, speech markup, desc elements, or other audio elements. The alternate content MAY also be used when rendering the document to non-audible output and for accessibility (see the desc element). In addition to the OPTIONAL attributes described in subsections below, audio has the following attributes:
| Name |
Required |
Type |
Default Value |
Description |
src |
false |
URI |
None |
The URI of a document with an appropriate media type. If absent, the audio element behaves as if src were present with a legal URI but the document could not be fetched. |
fetchtimeout |
false |
Time Designation |
Processor-specific |
The timeout for fetches. |
fetchhint |
false |
The value "prefetch" or the value "safe" |
prefetch |
This tells the synthesis processor whether or not it can attempt to optimize rendering by pre-fetching audio. The value is either safe to say that audio is only fetched when it is needed, never before; or prefetch to permit, but not require the processor to pre-fetch the audio. |
maxage |
false |
xsd:nonNegativeInteger |
None |
Indicates that the document is willing to use content whose age is no greater than the specified time (cf. 'max-age' in HTTP 1.1 [RFC2616]). The document is not willing to use stale content, unless maxstale is also provided. |
maxstale |
false |
xsd:nonNegativeInteger |
None |
Indicates that the document is willing to use content that has exceeded its expiration time (cf. 'max-stale' in HTTP 1.1 [RFC2616]). If maxstale is assigned a value, then the document is willing to accept content that has exceeded its expiration time by no more than the specified amount of time. |
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<!-- Empty element -->
Please say your name after the tone. <audio src="beep.wav"/>
<!-- Container element with alternative text -->
<audio src="prompt.au">What city do you want to fly from?</audio>
<audio src="welcome.wav">
<emphasis>Welcome</emphasis> to the Voice Portal.
</audio>
</speak>
An audio element is successfully rendered by:
- Playing the referenced audio source successfully
- If the referenced audio source fails to play, rendering the alternative content
- Additionally if the processor can detect that text-only output is required then it MAY render the alternative content
When attempting to play the audio source a number of different issues
may arise such as mismatched media types or bad header information
about the media. In general the synthesis processor makes a best effort to play the referenced media and, when unsuccessful, the processor MUST play
the alternative content. Note the processor MUST NOT render both all
or part of the referenced media and all or part of the referenced
alternative content. If any of the referenced media is processed and
rendered then the playback is considered a successful playback within
the context of this section. If an error occurs that causes the
alternative content to be rendered instead of the referenced media the
processor MUST notify the hosting environment that such an error has
occurred. The processor MAY notify the hosting environment
immediately with an asynchronous event, or the processor MAY notify
the hosting environment only at the end of playback when it signals to
the hosting environment that it has completed rendering the request, or the processor MAY make the error notification through its logging
system. The processor SHOULD include information about the error
where possible; for example, if the media resource couldn't be fetched
due to an http 404 error, that error code could be included with the
notification.
The audio element can only contain text to be rendered and the following elements: audio, break, desc, emphasis, lang, lookup, mark, p, phoneme, prosody, say-as, sub, s, token, voice, w.
3.3.1.1 Trimming attributes
Trimming attributes define the span of the audio to be
rendered. Both the start and the end of the span within the audio content can be specified using time offsets. The duration of the span, including repetitions, can also be specified with repeat attributes. Synthesis processor support for these attributes is REQUIRED in the Extended profile.
The following trimming attributes are defined for audio:
| Name |
Required |
Type |
Default Value |
Description |
clipBegin |
false |
Time Designation |
0s |
offset from start of media to begin rendering. This offset is
measured in normal media playback time from the beginning of the
media. |
clipEnd |
false |
Time Designation |
None |
offset from start of media to end rendering. This offset is
measured in normal media playback time from the beginning of the
media. |
repeatCount |
false |
a positive Real Number |
1 |
number of iterations of media to render. A fractional value describes a portion of the rendered media. |
repeatDur |
false |
Time Designation |
None |
total duration for repeatedly rendering media. This duration is measured in normal media playback time from the beginning of the media. |
Calculations of rendered durations and interaction with other timing
properties follow SMIL Computing the active duration where
- audio is a time container
- Time Designation values for
clipBegin, clipEnd, and repeatDur are a subset of SMIL Clock-value
- If the length of an audio clip is not known in advance then it is treated as indefinite. Consequently
repeatCount will have no effect.
- If
clipEnd is after the end of the audio, then rendering ends at the audio end.
- If
clipBegin is after clipEnd, no audio will be produced.
repeatDur takes precedence over repeatCount in determining the total time for rendering media.
Note that not all SMIL Timing features are supported.
Real Numbers
Real numbers and integers are specified in decimal notation only.
An integer consists of one or more digits "0" to "9".
A real number may be an integer, or it may be zero or more digits followed by a dot (.) followed by one or more digits. Both integers and real numbers may be preceded by a "-" or "+" to indicate the sign.
Time Designation
Time designations consist of a non-negative real number followed by a time unit identifier. The time unit identifiers are:
- ms: milliseconds
- s: seconds
Examples include: "3s", "850ms", "0.7s", ".5s" and "+1.5s".
Examples
In the following example, rendering of the media begins 10 seconds into the audio:
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis-extended.xsd"
xml:lang="en-US">
<audio src="radio.wav" clipBegin="10s" />
</speak>
Here the rendering of the media ends after 20 seconds of audio:
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis-extended.xsd"
xml:lang="en-US">
<audio src="radio.wav" clipBegin="10s" clipEnd="20s" />
</speak>
Note that if the duration of "radio.wav" is less than 20 seconds, the clipEnd value is ignored, and the rendering end is set equal to the effective end of the media.
In the following example, the duration of the audio is constrained by repeatCount:
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis-extended.xsd"
xml:lang="en-US">
<audio src="3second_sound.au" repeatCount="0.5" />
</speak>
Only the first half of the clip will play; the active duration will be 1.5 seconds.
In the following example, the audio will repeat for a total of 7 seconds. It will play fully two times, followed by a fractional part of 2 seconds. This is equivalent to a repeatCount of 2.8.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis-extended.xsd"
xml:lang="en-US">
<audio src="2.5second_music.mp3" repeatDur="7s" />
</speak>
In the following example, the active duration of the audio will be 4 seconds. Playback will start 1 second into the audio (as specified by the clipBegin value) and then play for 1 second (since clipEnd is specified as 2 seconds), and then this span will be repeated so that the total duration is 4 seconds (as specified by repeatDur). Note that the value of repeatDur takes precedence over the value of repeatCount.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis-extended.xsd"
xml:lang="en-US">
<audio src="2.5second_music.mp3" clipBegin="1s" clipEnd="2s"
repeatCount="5" repeatDur="4s" />
</speak>
These attributes can interact with the rendering specified by speak trimming attributes:
<speak version="1.1" startmark="mark1" endmark="mark2"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis-extended.xsd"
xml:lang="en-US">
<audio src="first.wav"/>
<mark name="mark1"/>
<audio src="15second_music.mp3" clipBegin="2s" clipEnd="7s" />
<mark name="mark2"/>
<audio src="last.wav"/>
</speak>
The speak startmark and endmark allow only the "15second_music.mp3" clip to be played. The actual duration of the audio is 5 seconds: the clip begins at 2 seconds into the audio and ends after 7 seconds, hence a duration of 5
seconds.
3.3.1.2 soundLevel Attribute
The soundLevel attribute specifies the relative volume of the referenced audio. It is inspired by the similarly-named attribute in SMIL [SMIL3]. Synthesis processor support for this attribute is REQUIRED in the Extended profile.
| Name |
Required |
Type |
Default Value |
Description |
soundLevel |
false |
signed ("+" or "-") CSS2 numbers immediately followed by "dB" |
The default value is +0.0dB. |
Decibel values are interpreted as a ratio of the squares of the new signal amplitude (a1) and the current amplitude (a0) and are defined in terms of dB: soundLevel(dB) = 20 log10 (a1 ∕ a0). A setting of a large negative value effectively plays the media silently. A value of '-6.0dB' will play the media at approximately half the amplitude of its current signal amplitude. Similarly, a value of '+6.0dB' will play the media at approximately twice the amplitude of its current signal amplitude (subject to hardware limitations). The absolute sound level of media perceived is further subject to system volume settings, which cannot be controlled with this attribute. |
Here is an example of how to use the soundLevel attribute:
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis-extended.xsd"
xml:lang="en-US">
<s>This is the original, unmodified waveform:
<audio src="message.wav"/>
</s>
<s>This is the same audio at approximately twice the signal amplitude:
<audio soundLevel="+6dB" src="message.wav"/>
</s>
<s>This is the same audio at approximately half the original signal amplitude:
<audio soundLevel="-6dB" src="message.wav"/>
</s>
</speak>
3.3.1.3 speed Attribute
The speed attribute controls the playback speed of the referenced audio, to speed up or slow down the effective rate of play relative to the original speed of the waveform. The argument value does not specify an absolute play speed, but rather is relative to the playback speed of the original waveform. Synthesis processor support for this attribute is REQUIRED in the Extended profile.
| Name |
Required |
Type |
Default Value |
Description |
speed |
false |
x%
(where x is a positive real value) |
The default value is 100%, which corresponds to the speed of an unmodified audio waveform. |
The speed at which to play the referenced audio, relative to the original speed.
The speed is set to the requested percentage of the speed of the original waveform. |
A change in the value of the speed attribute will change the rate at which recorded samples are played back. Note that this will affect the pitch.
Here is an example of how to use the speed attribute:
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis-extended.xsd"
xml:lang="en-US">
<s>This is the original, unmodified waveform:
<audio src="message.wav"/>
</s>
<s>This is the same audio at twice the speed:
<audio speed="200%" src="message.wav"/>
</s>
<s>This is the same audio at half the original speed:
<audio speed="50%" src="message.wav"/>
</s>
</speak>
A mark element is an empty element that places a marker into the text/tag sequence. It has one REQUIRED attribute, name, which is of type xsd:token [SCHEMA2 §3.3.2]. The mark element can be used to reference a specific location in the text/tag sequence, and can additionally be used to insert a marker into an output stream for asynchronous notification. When processing a mark element, a synthesis processor MUST do one or both of the following:
- inform the hosting environment with the value of the
name attribute and with information allowing the platform to retrieve the corresponding position in the rendered output.
- when audio output of the SSML document reaches the mark, issue an event that includes the REQUIRED
name attribute of the element. The hosting environment defines the destination of the event.
The mark element does not affect the speech output process.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
Go from <mark name="here"/> here, to <mark name="there"/> there!
</speak>
The desc element can only occur within the content of the audio element. When the audio source referenced in audio is not speech, e.g. audio wallpaper or sonicon punctuation, it should contain a desc element whose textual content is a description of the audio source (e.g. "door slamming"). If text-only output is being produced by the synthesis processor, the content of the desc element(s) SHOULD be rendered instead of other alternative content in audio. The OPTIONAL xml:lang attribute can be used to indicate that the content of the element is in a different language from that of the content surrounding the element. The OPTIONAL onlangfailure attribute can be used to specify the desired behavior upon language speaking failure.
<?xml version="1.0"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<!-- Normal use of <desc> -->
Heads of State often make mistakes when speaking in a foreign language.
One of the most well-known examples is that of John F. Kennedy:
<audio src="ichbineinberliner.wav">If you could hear it, this would be
a recording of John F. Kennedy speaking in Berlin.
<desc>Kennedy's famous German language gaffe</desc>
</audio>
<!-- Suggesting the language of the recording -->
<!-- Although there is no requirement that a recording be in the current language
(since it might even be non-speech such as music), an author might wish to
suggest the language of the recording by marking the entire <audio> element
using <lang>. In this case, the xml:lang attribute on <desc> can be used
to put the description back into the original language. -->
Here's the same thing again but with a different fallback:
<lang xml:lang="de-DE">
<audio src="ichbineinberliner.wav">Ich bin ein Berliner.
<desc xml:lang="en-US">Kennedy's famous German language gaffe</desc>
</audio>
</lang>
</speak>
The desc element can only contain descriptive text.
4. References
4.1 Normative References
- [BCP47]
- Tags for Identifying Languages and Matching of Language Tags, A. Phillips and M. Davis, Editors. IETF, September 2009. Available at http://www.rfc-editor.org/bcp/bcp47.txt.
- [CSS2]
- Cascading Style Sheets, level 2: CSS2 Specification, B. Bos, et al., Editors. World Wide Web Consortium, 12 May 1998. This version of the CSS2 Recommendation is http://www.w3.org/TR/1998/REC-CSS2-19980512/. The latest version of CSS2 is available at http://www.w3.org/TR/CSS2/.
Note this reference may be revised when the
CSS3 Speech Module
becomes a W3C Recommendation.
- [IPAHNDBK]
- Handbook of the International Phonetic Association, International Phonetic Association, Editors. Cambridge University Press, July 1999. Information on the Handbook is available at http://www.langsci.ucl.ac.uk/ipa/handbook.html.
- [PLS]
- Pronunciation Lexicon Specification (PLS) Version 1.0, P. Baggia, Editor. World Wide Web Consortium, 14 October 2008. This version of the PLS Recommendation is http://www.w3.org/TR/2008/REC-pronunciation-lexicon-20081014/. The latest version of PLS is available at http://www.w3.org/TR/pronunciation-lexicon/.
- [RFC1521]
- MIME (Multipurpose Internet Mail Extensions) Part One: Mechanisms for Specifying and Describing the Format of Internet Message Bodies, N. Borenstein and N. Freed, Editors. IETF, September 1993. This RFC is available at http://www.ietf.org/rfc/rfc1521.txt.
- [RFC2045]
- Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies., N. Freed and N. Borenstein, Editors. IETF, November 1996. This RFC is available at http://www.ietf.org/rfc/rfc2045.txt.
- [RFC2046]
- Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types, N. Freed and N. Borenstein, Editors. IETF, November 1996. This RFC is available at http://www.ietf.org/rfc/rfc2046.txt.
- [RFC2119]
- Key words for use in RFCs to Indicate Requirement Levels, S. Bradner, Editor. IETF, March 1997. This RFC is available at http://www.ietf.org/rfc/rfc2119.txt.
- [RFC3986]
- Uniform Resource Identifier (URI): Generic Syntax, T. Berners-Lee et al., Editors. IETF, January 2005. This RFC is available at http://www.ietf.org/rfc/rfc3986.txt.
- [RFC3987]
- Internationalized Resource Identifiers (IRIs), M. Duerst and M. Suignard, Editors. IETF, January 2005. This RFC is available at http://www.ietf.org/rfc/rfc3987.txt.
- [RFC4267]
- The W3C Speech Interface Framework Media Types: application/voicexml+xml, application/ssml+xml, application/srgs, application/srgs+xml, application/ccxml+xml, and application/pls+xml, M. Froumentin, Editor. IETF, November 2005. This RFC is available at http://www.ietf.org/rfc/rfc4267.txt.
- [SCHEMA1]
- XML Schema Part 1: Structures Second Edition, H. S. Thompson, et al., Editors. World Wide Web Consortium, 28 October 2004. This version of the XML Schema Part 1 Recommendation is http://www.w3.org/TR/2004/REC-xmlschema-1-20041028/. The latest version of XML Schema 1 is available at http://www.w3.org/TR/xmlschema-1/.
- [SCHEMA2]
- XML Schema Part 2: Datatypes Second Edition, P.V. Biron and A. Malhotra, Editors. World Wide Web Consortium, 28 October 2004. This version of the XML Schema Part 2 Recommendation is http://www.w3.org/TR/2004/REC-xmlschema-2-20041028/. The latest version of XML Schema 2 is available at http://www.w3.org/TR/xmlschema-2/.
- [SMIL3]
- Synchronized Multimedia Integration Language (SMIL 3.0), D. Bulterman, et al., Editors. World Wide Web Consortium, 1 December 2008. This version of the SMIL 3 Recommendation is http://www.w3.org/TR/2008/REC-SMIL3-20081201/. The latest version of SMIL3 is available at http://www.w3.org/TR/SMIL3/. This document is a work in progress.
- [TYPES]
- MIME Media types, IANA. This continually-updated list of media types registered with IANA is available at http://www.iana.org/assignments/media-types/index.html.
- [XML 1.0]
- Extensible Markup Language (XML) 1.0 (Fifth Edition), T. Bray et al., Editors. World Wide Web Consortium, 26 August 2008. This version of the XML 1.0 Recommendation is http://www.w3.org/TR/2008/REC-xml-20081126/. The latest version of XML 1.0 is available at http://www.w3.org/TR/xml/.
- [XML 1.1]
- Extensible Markup Language (XML) 1.1 (Second Edition), T. Bray et al., Editors. World Wide Web Consortium, 16 August 2006. This version of the XML 1.1 Recommendation is http://www.w3.org/TR/2006/REC-xml11-20060816/. The latest version of XML 1.1 is available at http://www.w3.org/TR/xml11/.
- [XML-BASE]
- XML Base (Second Edition), J. Marsh and R. Tobin, Editors. World Wide Web Consortium, 28 January 2009. This version of the XML Base Recommendation is http://www.w3.org/TR/2009/REC-xmlbase-20090128/. The latest version of XML Base is available at http://www.w3.org/TR/xmlbase/.
- [XML-ID]
- xml:id Version 1.0, J. Marsh et al., Editors. World Wide Web Consortium, 9 September 2005. This version of the xml:id Recommendation is http://www.w3.org/TR/2005/REC-xml-id-20050909/. The latest version of xml:id is available at http://www.w3.org/TR/xml-id/.
- [XMLNS 1.0]
- Namespaces in XML 1.0 (Third Edition), T. Bray et al., Editors. World Wide Web Consortium, 8 December 2009. This version of the XML Namespaces 1.0 Recommendation is http://www.w3.org/TR/2009/REC-xml-names-20091208/. The latest version of XML Namespaces 1.0 is available at http://www.w3.org/TR/REC-xml-names/.
- [XMLNS 1.1]
- Namespaces in XML 1.1 (Second Edition), T. Bray et al., Editors. World Wide Web Consortium, 16 August 2006. This version of the XML Namespaces 1.1 Recommendation is http://www.w3.org/TR/2006/REC-xml-names11-20060816/. The latest version of XML Namespaces 1.1 is available at http://www.w3.org/TR/xml-names11/.
4.2 Informative References
- [DC]
- Dublin Core Metadata Initiative. See http://dublincore.org/
- [HTML]
- HTML 4.01 Specification, D. Raggett et al., Editors. World Wide Web Consortium, 24 December 1999. This version of the HTML 4 Recommendation is http://www.w3.org/TR/1999/REC-html401-19991224/. The latest version of HTML 4 is available at http://www.w3.org/TR/html4/.
- [IPA]
- International Phonetic Association. See http://www.langsci.ucl.ac.uk/ipa/ for the organization's website.
- [IPAUNICODE1]
- The International Phonetic Alphabet, J. Esling. This table of IPA characters in Unicode is available at http://web.uvic.ca/ling/resources/ipa/charts/unicode_ipa-chart.htm.
- [IPAUNICODE2]
- The International Phonetic Alphabet in Unicode, J. Wells. This table of Unicode values for IPA characters is available at http://www.phon.ucl.ac.uk/home/wells/ipa-unicode.htm.
- [JEIDAALPHABET]
- JEIDA-62-2000 Phoneme Alphabet. JEITA. An abstract of this document (in Japanese) is available at http://it.jeita.or.jp/document/publica/standard/summary/JEIDA-62-2000.pdf.
- [JEITA]
- Japan Electronics and Information Technology Industries Association. See http://www.jeita.or.jp/.
- [JSML]
- JSpeech Markup Language, A. Hunt, Editor. World Wide Web Consortium, 5 June 2000. Copyright ©2000 Sun Microsystems, Inc. This version of the JSML submission is http://www.w3.org/TR/2000/NOTE-jsml-20000605/. The latest W3C Note of JSML is available at http://www.w3.org/TR/jsml/.
- [LEX]
- Pronunciation Lexicon Markup Requirements, P. Baggia and F. Scahill, Editors. World Wide Web Consortium, 29 October 2004. This document is a work in progress. This version of the Lexicon Requirements is http://www.w3.org/TR/2004/WD-lexicon-reqs-20041029/. The latest version of the Lexicon Requirements is available at http://www.w3.org/TR/lexicon-reqs/.
- [RDF]
- RDF Primer, F. Manola and E. Miller, Editors. World Wide Web Consortium, 10 February 2004. This version of the RDF Primer Recommendation is http://www.w3.org/TR/2004/REC-rdf-primer-20040210/. The latest version of the RDF Primer is available at http://www.w3.org/TR/rdf-primer/.
- [RDF-XMLSYNTAX]
- RDF/XML Syntax Specification, D. Beckett, Editor. World Wide Web Consortium, 10 February 2004. This version of the RDF/XML Syntax Recommendation is http://www.w3.org/TR/2004/REC-rdf-syntax-grammar-20040210/. The latest version of the RDF XML Syntax is available at http://www.w3.org/TR/rdf-syntax-grammar/.
- [RDF-SCHEMA]
- RDF Vocabulary Description Language 1.0: RDF Schema, D. Brickley and R. Guha, Editors. World Wide Web Consortium, 10 February 2004. This version of the RDF Schema Recommendation is http://www.w3.org/TR/2004/REC-rdf-schema-20040210/. The latest version of RDF Schema is available at http://www.w3.org/TR/rdf-schema/.
- [REQS]
- Speech Synthesis Markup Requirements for Voice Markup Languages, A. Hunt, Editor. World Wide Web Consortium, 23 December 1999. This document is a work in progress. This version of the Synthesis Requirements is http://www.w3.org/TR/1999/WD-voice-tts-reqs-19991223/. The latest version of the Synthesis Requirements is available at http://www.w3.org/TR/voice-tts-reqs/.
- [REQS11]
- Speech Synthesis Markup Language Version 1.1 Requirements, D. Burnett and Z. Shuang, Editors. World Wide Web Consortium, 11 June 2007. This document is a work in progress. This version of the SSML 1.1 Requirements is http://www.w3.org/TR/2007/WD-ssml11reqs-20070611/. The latest version of the SSML 1.1 Requirements is available at http://www.w3.org/TR/ssml11reqs/.
- [RFC2616]
- Hypertext Transfer Protocol -- HTTP/1.1, R. Fielding, et al., Editors. IETF, June 1999. This RFC is available at http://www.ietf.org/rfc/rfc2616.txt.
- [RFC2732]
- Format for Literal IPv6 Addresses in URL's, R. Hinden, et al., Editors. IETF, December 1999. This RFC is available at http://www.ietf.org/rfc/rfc2732.txt.
- [RUBY]
- Ruby Annotation,
Marcin Sawicki, et al., Editors. World Wide Web Consortium, 31 May 2001. This version of the Ruby Recommendation is
http://www.w3.org/TR/2001/REC-ruby-20010531/.
The latest version is available at http://www.w3.org/TR/ruby/.
- [SABLE]
- "SABLE: A Standard for TTS Markup", Richard Sproat, et al. Proceedings of the International Conference on Spoken Language Processing, R. Mannell and J. Robert-Ribes, Editors. Causal Productions Pty Ltd (Adelaide), 1998. Vol. 5, pp. 1719-1722. Conference proceedings are available from the publisher at http://www.causalproductions.com/.
- [SSML]
- Speech Synthesis Markup Language (SSML) Version 1.0,
Daniel C. Burnett, et al., Editors. World Wide Web Consortium, 7 September 2004. This version of the SSML 1.0 Recommendation is
http://www.w3.org/TR/2004/REC-speech-synthesis-20040907/.
The latest version is available at http://www.w3.org/TR/speech-synthesis/.
- [UNICODE]
- The Unicode Standard. The Unicode Consortium. Information about the Unicode Standard and its versions can be found at http://www.unicode.org/standard/standard.html.
- [WEB-ARCH]
- Architecture of the World Wide Web, Version One, I. Jacobs, N. Walsh, Editors. World Wide Web Consortium, 15 December 2004. This version of the WWW Architecture is http://www.w3.org/TR/2004/REC-webarch-20041215/. The latest version of WWW Architecture is available at http://www.w3.org/TR/webarch/.
- [VXML]
- Voice Extensible Markup Language (VoiceXML) Version 2.0, S. McGlashan, et al., Editors. World Wide Web Consortium, 16 March 2004. This version of the VoiceXML 2.0 Recommendation is http://www.w3.org/TR/2004/REC-voicexml20-20040316/. The latest version of VoiceXML 2 is available at http://www.w3.org/TR/voicexml20/.
- [WS]
- Minutes, W3C Workshop on Internationalizing the Speech Synthesis Markup Language, 2-3 November 2005. The agenda and minutes are available at
http://www.w3.org/2005/08/SSML/ssml-workshop-agenda.html.
- [WS2]
- Minutes, W3C Workshop on Internationalizing the Speech Synthesis Markup Language, 30-31 May 2006. The agenda is available at http://www.w3.org/2006/02/SSML/agenda.html. The minutes are available at
http://www.w3.org/2006/02/SSML/minutes.html.
- [WS3]
- Minutes, W3C Workshop on Internationalizing the Speech Synthesis Markup Language, 13-14 January 2007. The agenda is available at http://www.w3.org/2006/10/SSML/agenda.html. The minutes are available at
http://www.w3.org/2006/10/SSML/minutes.html.
5. Acknowledgments
This document was written with the participation of the following participants in the W3C Voice Browser Working Group and other W3C Working Groups (listed in family name alphabetical order):
- 芦村 和幸 (Kazuyuki Ashimura), W3C
Max Froumentin, W3C (at the time of participation)
黄力行 (Lixing Huang), Chinese Academy of Sciences (at the time of participation)
Andrew Hunt, Speechworks (at the time of participation)
今竹 渉 (Wataru Imatake), Invited Expert
Richard Ishida, W3C
Jim Larson, Invited Expert (formerly of Intervoice)
Wai-Kit Lo, Chinese University of Hong Kong (at the time of participation)
Mark Walker, Intel (at the time of participation)
The editors also wish to thank the members of the W3C Internationalization Working Group, who have provided significant review and contributions to SSML 1.0 and 1.1.
This appendix is normative.
SSML requires that a platform support the playing of the audio formats specified below.
Required audio formats
| Audio Format |
Media Type |
| Raw (headerless) 8kHz 8-bit mono mu-law (PCM) single channel. (G.711) |
audio/basic (from [RFC1521]) |
| Raw (headerless) 8kHz 8 bit mono A-law (PCM) single channel. (G.711) |
audio/x-alaw-basic |
| WAV (RIFF header) 8kHz 8-bit mono mu-law (PCM) single channel. |
audio/x-wav |
| WAV (RIFF header) 8kHz 8-bit mono A-law (PCM) single channel. |
audio/x-wav |
The 'audio/basic' media type is commonly used with the 'au' header format as well as the headerless 8-bit 8kHz mu-law format. If this media type is specified for playing, the mu-law format MUST be used. For playback with the 'audio/basic' media type, processors MUST support the mu-law format and MAY support the 'au' format.
Appendix B: Internationalization
This appendix is normative.
SSML is an application of XML [XML 1.0 or XML 1.1] and thus supports [UNICODE] which defines a standard universal character set.
SSML provides a mechanism for control of the spoken language via the use of the xml:lang attribute. Language changes can occur as frequently as per token (word), although excessive language changes can diminish the output audio quality. SSML also permits finer control over output pronunciations via the lexicon and phoneme elements, features that can help to mitigate poor quality default lexicons for languages with only minimal commercial support today.
Appendix C: Media Types and File Suffix
This appendix is normative.
The media type associated with the Speech Synthesis Markup Language specification is "application/ssml+xml" and the filename suffix is ".ssml" as defined in [RFC4267].
Appendix D: Schema for the Speech Synthesis Markup Language
This appendix is normative.
The synthesis schema for the Core profile (Sec. 2.2.5) is located at http://www.w3.org/TR/speech-synthesis11/synthesis.xsd, and the schema for the Extended profile (Sec. 2.2.5) is located at http://www.w3.org/TR/speech-synthesis11/synthesis-extended.xsd.
Note: the synthesis schemas include no-namespace schemas for the Core and Extended profiles, located respectively at http://www.w3.org/TR/speech-synthesis11/synthesis-nonamespace.xsd and http://www.w3.org/TR/speech-synthesis11/synthesis-nonamespace-extended.xsd, which MAY be used as a basis for specifying Speech Synthesis Markup Language Fragments (Sec. 2.2.1) embedded in non-synthesis namespace schemas.
Also for stability it is RECOMMENDED that you use the following dated URIs for the above schema files:
This appendix is informative.
The following is an example of reading headers of email messages. The p and s elements are used to mark the text structure. The break element is placed before the time and has the effect of marking the time as important information for the listener to pay attention to. The prosody element is used to slow the speaking rate of the email subject so that the user has extra time to listen and write down the details.
<?xml version="1.0"?>
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<p>
<s>You have 4 new messages.</s>
<s>The first is from Stephanie Williams and arrived at <break/> 3:45pm.
</s>
<s>
The subject is <prosody rate="-20%">ski trip</prosody>
</s>
</p>
</speak>
The following example combines audio files and different spoken voices to provide information on a collection of music.
<?xml version="1.0"?>
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<p>
<voice gender="male">
<s>Today we preview the latest romantic music from Example.</s>
<s>Hear what the Software Reviews said about Example's newest hit.</s>
</voice>
</p>
<p>
<voice gender="female">
He sings about issues that touch us all.
</voice>
</p>
<p>
<voice gender="male">
Here's a sample. <audio src="http://www.example.com/music.wav"/>
Would you like to buy it?
</voice>
</p>
</speak>
It is often the case that an author wishes to include a bit of foreign text (say, a movie title) in an application without having to switch languages (for example via the lang element). A simple way to do this is shown here. In this example the synthesis processor would render the movie name using the pronunciation rules of the container language ("en-US" in this case), similar to how a reader who doesn't know the foreign language might try to read (and pronounce) it.
<?xml version="1.0" encoding="ISO-8859-1"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
The title of the movie is:
"La vita è bella"
(Life is beautiful),
which is directed by Roberto Benigni.
</speak>
With some additional work the output quality can be improved tremendously either by creating a custom pronunciation in an external lexicon (see Section 3.1.5) or via the phoneme element as shown in the next example.
It is worth noting that IPA alphabet support is an OPTIONAL feature and that phonemes for an external language may be rendered with some approximation (see Section 3.1.5 for details). The following example only uses phonemes common to US English.
<?xml version="1.0" encoding="ISO-8859-1"?>
<speak version="1.1" xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
The title of the movie is:
<phoneme alphabet="ipa"
ph="ˈlɑ ˈviːɾə ˈʔeɪ ˈbɛlə">
La vita è bella </phoneme>
<!-- The IPA pronunciation is ˈlɑ ˈviːɾə ˈʔeɪ ˈbɛlə -->
(Life is beautiful),
which is directed by
<phoneme alphabet="ipa"
ph="ɹəˈbɛːɹɾoʊ bɛˈniːnji">
Roberto Benigni </phoneme>
<!-- The IPA pronunciation is ɹəˈbɛːɹɾoʊ bɛˈniːnji -->
<!-- Note that in actual practice an author might change the
encoding to UTF-8 and directly use the Unicode characters in
the document rather than using the escapes as shown.
The escaped values are shown for ease of copying. -->
</speak>
SMIL Integration Example
The SMIL language [SMIL3] is an XML-based multimedia control language. It is especially well suited for describing dynamic media applications that include synthetic speech output.
File 'greetings.ssml' contains the following:
<?xml version="1.0"?>
<speak version="1.1"
xmlns="http://www.w3.org/2001/10/synthesis"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
http://www.w3.org/TR/speech-synthesis11/synthesis.xsd"
xml:lang="en-US">
<s>
<mark name="greetings"/>
<emphasis>Greetings</emphasis> from the <sub alias="World Wide Web Consortium">W3C</sub>!
</s>
</speak>
SMIL Example 1: W3C logo image appears, and then one second later, the speech sequence is rendered. File 'greetings.smil' contains the following:
<smil xmlns="http://www.w3.org/ns/SMIL" version="3.0" baseProfile="Language">
<head>
<top-layout width="640" height="320">
<region id="whole" width="640" height="320"/>
</top-layout>
</head>
<body>
<par>
<img src="http://www.w3.org/Icons/w3c_home" region="whole" begin="0s"/>
<ref src="greetings.ssml" begin="1s"/>
</par>
</body>
</smil>
SMIL Example 2: W3C logo image appears, then clicking on the image causes it to disappear and the speech sequence to be rendered. File 'greetings.smil' contains the following:
<smil xmlns="http://www.w3.org/ns/SMIL" version="3.0" baseProfile="Language">
<head>
<top-layout width="640" height="320">
<region id="whole" width="640" height="320"/>
</top-layout>
</head>
<body>
<seq>
<img id="logo" src="http://www.w3.org/Icons/w3c_home" region="whole" begin="0s" end="logo.activateEvent"/>
<ref src="greetings.ssml"/>
</seq>
</body>
</smil>
VoiceXML Integration Example
The following is an example of SSML in VoiceXML (see Section 2.3.3) for voice browser applications. It is worth noting that the VoiceXML namespace includes the SSML namespace elements and attributes. See Appendix O of [VXML] for details.
<?xml version="1.0" encoding="UTF-8"?>
<vxml version="2.0" xmlns="http://www.w3.org/2001/vxml"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.w3.org/2001/vxml
http://www.w3.org/TR/voicexml20/vxml.xsd">
<form>
<block>
<prompt>
<emphasis>Welcome</emphasis> to the Bird Seed Emporium.
<audio src="rtsp://www.birdsounds.example.com/thrush.wav"/>
We have 250 kilogram drums of thistle seed for
$299.95
plus shipping and handling this month.
<audio src="http://www.birdsounds.example.com/mourningdove.wav"/>
</prompt>
</block>
</form>
</vxml>
Appendix F: Changes since SSML 1.0
This appendix is informative.
In the event of modifying an SSML 1.0 conformant document for a
synthesis processor that supports only SSML 1.1, document authors are
informed of the following note on compatibility:
- SSML 1.0 conformant elements requiring no changes for SSML 1.1
are: <break>, <emphasis>, <mark>, <metadata>, <meta>, <sub>, <say-as>, <desc>, and partially <prosody> (excluding rate and volume attributes)
- Elements with attribute changes in SSML 1.1 are: <s> <p> <phoneme> <audio> <speak>. Their SSML 1.0 syntax and semantics are compatible in SSML 1.1
- Elements with a changed syntax and/or semantics between SSML 1.0 and SSML 1.1 are: <lexicon>, <voice>, and partially <prosody> (rate and volume attributes only)
- New elements in SSML 1.1 are: <lang>, <lookup> and <token>/<w>
And the following is a consolidated list of all changes since SSML 1.0.
- In 3.1.7, added <token> element to mark the boundaries of a word. Added <w> as an alias for <token>.
- Added role attribute onto <token> element to provide more explicit linkage with PLS lexicons.
- In 3.1.2, xml:lang is defined to describe the language of the text content and is added onto the new <token> element.
- Added xml:id attribute (new section after 3.1.3 xml:base) onto <lexicon>, <p>, <s>, <token>, and <w> elements to enhance external references into SSML content.
- In 3.1.5 lexicon, added <lookup> element to control which lexicons are currently in use. <lexicon> now only defines which lexicons are used in the document.
- Removed general text describing how text may be mapped to entries in the lexicon.
- The default <lexicon> type is now "application/pls+xml", as defined by the PLS 1.0 specification.
- Introduced the notion of a Pronunciation Alphabet Registry that would maintain a list of registered values for the alphabet attribute of the <phoneme> element.
- Removed the xml:lang attribute from the <voice> element to reduce confusion.
- Added <lang> element to allow setting xml:lang for arbitrary text content.
- Clarified in <voice> description that indication of language and voice are independent, no synthesis processor is required to support all combinations thereof, and processors must document behavior for every combination thereof.
- 3.1.5: Now mandates that if a referenced lexicon is a PLS document, then the information in it must be used by the processor.
- 3.1.5.2: Clarified that the processor already has built-in system lexicons whose values are overridden by use of the <lexicon> and <lookup> elements.
- Updated entire document to allow for XML and XMLNS 1.1 in addition to 1.0. Clarified in definition of URI that IRIs are allowed and added an informative reference to RFC3987.
- Completely revamped how voice selection and language speaking control are done.
In 3.2.1, added "languages", "required", "ordering", and "onvoicefailure" attributes, introduced a new voice selection algorithm. Voice selection is now scoped.
Added new "onlangfailure" attribute (new section 3.1.13) on all elements that take the "xml:lang" attribute: <speak>, <lang>, <desc>, <p>, <s>, <token>, and <w>.
- Added trimming attributes to <speak> (section 3.1.1) to accommodate expected VoiceXML 3 needs.
- In 3.3.1, added trimming, soundLevel, and speed attributes to <audio> to accommodate expected VoiceXML 3 needs. In 1.2 made reference to the new capabilities of the <audio> element.
- Revised error text in <audio> description to better explain appropriate notification behavior.
- In 2.2.3, added example of using Ruby within SSML. Added Informative reference to Ruby.
- Changed many instances of "word" to "token" to clarify when the specification is referring to tokens; this is particularly relevant in discussions of parsing and linkage with lexicons.
- Added text in status section explaining the motivation and background for SSML 1.1. Also added the requirements document and the workshops to the informative references section.
- Applied styling to relevant uses of RFC2119 keywords.
- Clarified in status section that we are referring to natural (human) languages. Clarified in 3.1.2 that xml:lang indicates the language of the *written* content.
- Moved a paragraph from 3.1.5 to 3.1.5.2 that explains when the information in a lexicon document must be used.
- Clarified in 1.2 that the tokens may not span markup elements except within the <token> and <w> elements.
- In 3.1.10, added a new optional "type" attribute with values of "default" (the default) and "ruby".
- Split into two profiles: Core and extended
Added text in section 2.2.4 allowing for processor conformance variations as given in individual sections (intended to support profile variations).
In Appendix D there are now four schemas: no-namespace and regular schemas for the Core and Extended profiles. Updated all examples accordingly.
Added new section 2.2.5 describing the two profiles.
- In 3.1.2, removed the list of elements that "should be rendered in a manner appropriate to the current language" because it is no longer necessary.
- In 1.2, added text to step 6 explaining the default volume/soundLevel, speed/rate, and pitch/frequency for voices and recordings in the document.
- Renumbered section 2.2.5 to be 2.2.6. Inserted new section 2.2.5 defining profiles. Added sub-sections to 2.2.1, 2.2.2, and 2.2.4 for the two profiles. Updated relevant text in 3.3.1.1, 3.3.1.2, and 3.3.1.4.
- In 3.2.4, adjusted <prosody> "volume" definition to align better with the new <audio> "soundLevel" attribute definition (now a logarithmic control), also noting potential difference between behavior when using labels and behavior when using numerical values.
- In 3.2.4, for the "duration" attribute, adjusted the wording about contained elements to match that of the other attributes ("contained text").
- In 3.2.4, changed definition of non-negative percentage to be an unsigned number followed by a '%'.
- In 3.2.4, updated "rate" attribute description to use "non-negative percentage" instead of "relative value".
- In 3.3.1.2, changed SMIL reference to be SMIL3 and added SMIL3 as a Normative reference in the references section.
- In 3.1.5.1 (lexicon) and 3.3.1 (audio), added maxage and maxstale attributes.
- In 2.1, clarified that when no xsi:schemaLocation is given the Core profile is to be assumed.
- In 3.2.1, added link to the "onlangfailure" attribute. Also added "Voice description" section and links to it from the "languages" attribute description.
- Changed all references to RFC4647 to be "BCP 47, Matching of Language Tags". BCP47 is now a Normative Reference.
- Removed stale reference to RFC3066.
- In 3.1.2, added text explaining the relationship between xml:lang, onlangfailure, and how a voice will speak text.
- In 3.3.1, made "src" optional and added "fetchhint" and "fetchtimeout" attributes to the <audio> element.
- In 3.1.5.1, added "fetchtimeout" attribute to the <lexicon> element. Also added text explaining what is expected when there is a failure fetching the lexicon.
- In 2.3, clarified that non-SSML attributes are permitted as well. The schema have been updated to allow for non-SSML attributes on all SSML elements and non-SSML elements as children of all SSML elements.
- Removed the DTD (Appendix E), relabeled Appendix F (Example SSML) as Appendix E, and relabeled Appendix G (Changes since SSML 1.0) as Appendix F.
- Added an informative reference to "Architecture of the World Wide Web, Volume One". Updated the definition of URI in section 1.5 to refer to it.
- In 3.1.10, noted that white space characters may occur in IPA strings and that they have no effect on the pronunciation.
- Removed DOCTYPE from Section 2 and all examples because there is no longer a DTD to reference.
Appendix G: Changes since last draft
This appendix is informative.
Since the publication of the Proposed Recommendation of the SSML 1.1
specification, the following minor editorial changes have been
added to the draft in response to comments.
-
In section 4, updated URIs of IPA sites.
-
In Appendix D,
changed schemaLocation URI
from
"http://www.w3.org/TR/2010/PR-speech-synthesis11-20100223/"
to
"http://www.w3.org/TR/2010/REC-speech-synthesis11-20100907/".
-
In Appendix F,
added a note on backwards compatibility with SSML 1.0.
-
Fixed errors in
the no-namespace schema
(synthesis-nonamespace.xsd).