Waste

This article's lead section may be too short to adequately summarize the key points. Please consider expanding the lead to provide an accessible overview of all important aspects of the article. (September 2021)

Part of a series on
Pollution
Air pollution from a factory
Air Acid rain Air quality index Atmospheric dispersion modeling Chlorofluorocarbon Combustion Exhaust gas Haze Global dimming Global distillation Indoor air quality Non-exhaust emissions Ozone depletion Particulates Persistent organic pollutant Smog Soot Volatile organic compound
Biological Biological hazard Genetic Illegal logging Introduced species Invasive species
Digital Information
Electromagnetic Light Ecological Overillumination Radio spectrum
Natural Ozone Radium and radon in the environment Volcanic ash Wildfire
Noise Transportation Health effects from noise Marine mammals and sonar Noise barrier Noise control Soundproofing
Radiation Actinides Bioremediation Depleted uranium Nuclear fission Nuclear fallout Plutonium Poisoning Radioactivity Uranium Radioactive waste
Soil Agricultural Land degradation Bioremediation Defecation Electrical resistance heating Illegal mining Soil guideline values Phytoremediation
Solid waste Advertising mail Biodegradable waste Brown waste Electronic waste Foam food container Food waste Green waste Hazardous waste Industrial waste Litter Mining Municipal solid waste Nanomaterials Plastic Packaging waste Post-consumer waste Waste management
Space Space debris
Thermal Urban heat island
Visual Air travel Advertising clutter Overhead power lines Traffic signs Urban blight Vandalism
War Chemical warfare Herbicidal warfare Agent Orange Nuclear holocaust Nuclear fallout Nuclear famine Nuclear winter Scorched earth Unexploded ordnance War and environmental law
Water Agricultural wastewater Biosolids Diseases Eutrophication Firewater Freshwater Groundwater Hypoxia Industrial wastewater Marine Monitoring Nonpoint source Nutrient Ocean acidification Oil spill Pharmaceuticals Freshwater salinization Septic tanks Sewage Shipping Sludge Stagnation Sulfur water Surface runoff Turbidity Urban runoff Water quality Wastewater
Topics History Pollutants Heavy metals Paint
Misc Area source Brain health and pollution Debris Dust Garbology Legacy Midden Point source Waste Toxic Lists Diseases Law by country Most polluted cities Least polluted cities by PM2.5 Treaties Most polluted rivers Categories By country
Environment portal Ecology portal
v t e

Waste (or wastes) are unwanted or unusable materials. Waste is any substance discarded after primary use, or is worthless, defective and of no use. A by-product, by contrast is a joint product of relatively minor economic value. A waste product may become a by-product, joint product or resource through an invention that raises a waste product's value above zero.

Examples include municipal solid waste (household trash/refuse), hazardous waste, wastewater (such as sewage, which contains bodily wastes (feces and urine) and surface runoff), radioactive waste, and others.

The examples and perspective in this article may not represent a worldwide view of the subject. You may improve this article, discuss the issue on the talk page, or create a new article, as appropriate. (August 2020) (Learn how and when to remove this message)

What constitutes waste depends on the eye of the beholder; one person's waste can be a resource for another person.^[1] Though waste is a physical object, its generation is a physical and psychological process.^[1] The definitions used by various agencies are as below.

According to the Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and Their Disposal of 1989, Art. 2(1), "'Wastes' are substance or objects, which are disposed of or are intended to be disposed of or are required to be disposed of by the provisions of national law".^[2]

The UNSD Glossary of Environment Statistics^[3] describes waste as "materials that are not prime products (that is, products produced for the market) for which the generator has no further use in terms of his/her own purposes of production, transformation or consumption, and of which he/she wants to dispose. Wastes may be generated during the extraction of raw materials, the processing of raw materials into intermediate and final products, the consumption of final products, and other human activities. Residuals recycled or reused at the place of generation are excluded."

Under the Waste Framework Directive 2008/98/EC, Art. 3(1), the European Union defines waste as "an object the holder discards, intends to discard or is required to discard."^[4] For a more structural description of the Waste Directive, see the European Commission's summary.

This section is an excerpt from Metabolic waste.[edit]

Metabolic wastes or excrements are substances left over from metabolic processes (such as cellular respiration) which cannot be used by the organism (they are surplus or toxic), and must therefore be excreted. This includes nitrogen compounds, water, CO₂, phosphates, sulphates, etc. Animals treat these compounds as excretes. Plants have metabolic pathways which transforms some of them (primarily the oxygen compounds) into useful substances.

All the metabolic wastes are excreted in a form of water solutes through the excretory organs (nephridia, Malpighian tubules, kidneys), with the exception of CO₂, which is excreted together with the water vapor throughout the lungs. The elimination of these compounds enables the chemical homeostasis of the organism.

The Organization for Economic Co-operation and Development also known as OECD defines municipal solid waste (MSW) as "waste collected and treated by or for municipalities".^[6] Typically this type of waste includes household waste, commercial waste, and demolition or construction waste. In 2018, the Environmental Protection Agency concluded that 292.4 tons of municipal waste was generated which equated to about 4.9 pounds per day per person. Out of the 292.4 tons, approximately 69 million tons were recycled, and 25 million tons were composted.^[7]

Household waste more commonly known as trash or garbage are items that are typically thrown away daily from ordinary households. Items often included in this category include product packaging, yard waste, clothing, food scraps, appliance, paints, and batteries.^[8] Most of the items that are collected by municipalities end up in landfills across the world. In the United States, it is estimated that 11.3 million tons of textile waste is generated. On an individual level, it is estimated that the average American throws away 81.5 pounds of clothes each year.^[9] As online shopping becomes more prevalent, items such as cardboard, bubble wrap, shipping envelopes are ending up in landfills across the United States. The EPA has estimated that approximately 10.1 million tons of plastic containers and packaging ended up landfills in 2018. The EPA noted that only 30.5% of plastic containers and packaging was recycled or combusted as an energy source. Additionally, approximately 940,000 pounds of cardboard ends up in the landfill each year.^[10]

Commercial waste is very similar to household waste. To be considered as commercial waste, it must come from a business or commercial occupancy. This can be restaurants, retail occupants, manufacturing occupants or similar businesses. Typically, commercial waste contains similar items such as food scraps, cardboard, paper, and shipping materials.^[11] Generally speaking, commercial waste creates more waste than household waste on a per location basis.

The EPA defines this type of waste as "Construction and Demolition (C&D) debris is a type of waste that is not included in municipal solid waste (MSW)."^[12] Items typically found in C&D include but are not limited to steel, wood products, drywall and plaster, brick and clay tile, asphalt shingles, concrete, and asphalt. Generally speaking, construction and demolition waste can be categorized as any components needed to build infrastructures. In 2018, the EPA estimated that the US generated approximately 600 million tons of C&D waste.^[12]  The waste generated by construction and demolition is often intended to be reused or is sent to the landfill. Examples of reused waste is milled asphalt can be used again for the asphalt mixture or fill dirt can be used to level grade.

The EPA defines hazardous waste as "a waste with properties that make it dangerous or capable of having a harmful effect on human health or the environment."^[13]  Hazardous Waste falls under the Resource Conservation and Recovery Act (RCRA).  Under the RCRA, the EPA has the authority to control hazardous waste during its entire lifecycle.^[14] This means from the point of creation to the point where it has been properly disposed of. The life cycle of hazardous waste includes generation, transportation, treatment, and storage and disposal. All of which are included in the RCRA. Some forms of hazardous waste include radioactive waste, explosive waste, and electronic waste.

Radioactive waste, often referred to as nuclear waste, is produced by various industries such as nuclear power plants, nuclear reactors, hospitals, research centers, and mining facilities. Any activity that involves radioactive material can generate radioactive waste.^[15] Furthermore, such waste emits radioactive particles, which if not handled correctly, can be both an environmental hazard as well as a human health hazard.^[15] When dealing with radioactive waste, it is extremely important to understand the necessary protocols and follow the correct precautions. Failure to handle and recycle these materials can have catastrophic consequences and potentially damage the site's ecosystems for years to come.^[15]

Radioactive waste is monitored and regulated by multiple governmental agencies such as Nuclear Regulatory Commission (NRC), Department of Energy (DOE), Environmental Protection Agency (EPA), Department of Transportation (DOT), and Department of the Interior (DOI).  Each agency plays an important role in creating, handling, and properly disposing of radioactive waste. A brief description of each agency's role can be found below.

NRC: "Licenses and regulates the receipt and possession of high-level waste at privately owned facilities and at certain DOE facilities."^[16]

DOE: "Plans and carries out programs for sand handling of DOE-generated radioactive wastes, develops waste disposal technologies, and will design, construct and operate disposal facilities for DOE-generated and commercial high-level wastes."^[16]

EPA: "Develops environmental standards and federal radiation protection guidance for offsite radiation due to the disposal of spent nuclear fuel and high-level and transuranic radioactive wastes."^[16]

DOT: "Regulates both the packaging and carriage of all hazardous materials including radioactive waste."^[16]

DOI: "Through the U.S. Geological Survey, conducts laboratory and field geologic investigations in support of DOE's waste disposal programs and collaborates with DOE on earth science technical activities."^[16]

The US currently defines five types of radioactive waste, as shown below.

High-level Waste: This type of radioactive waste is generated from nuclear reactors or reprocessing spent nuclear fuel.^[15]

Transuranic Waste: This type of radioactive waste is man-made and has an atomic number of 92 or higher.^[15]

Uranium or thorium mill tailings: This type of radioactive waste is a result after the mining or milling or uranium or thorium ore.^[15]

Low-level waste: This type of radioactive waste is radioactively contaminated waste. It is typically generated from industrial processes or research. Examples of these items include paper, protective clothing, bags, and cardboard.^[15]

Technologically enhanced naturally-occurring radioactive material (TENORM): This type of radioactive waste is created through human activity such as mining, oil and gas drilling, and water treatment where naturally-occurring radiological material (NORM) becomes concentrated.^[15]

The EPA defines energetic hazardous waste as "wastes that have the potential to detonate and bulk military propellants which cannot safely be disposed of through other modes of treatments."^[17] The items which typically fall under this category include munitions, fireworks, flares, hobby rockets, and automobile propellants.

Munitions were added to hazardous waste in 1997 when the EPA finalized RCRA. A special rule was added to address munitions in waste. This new rule is commonly referred to as the Military Munitions Rule.^[17] The EPA defines military munitions as "all types of both conventional and chemical ammunition products and their components, produced by or for the military for national defense and security (including munitions produced by other parties under contract to or acting as an agent for DOD—in the case of Government Owned/Contractor Operated [GOCO] operations)."^[17] While a large percentage of munitions waste is generated by the government or governmental contractors, residents also throw away expired or faulty ammunition inside their household waste.

Every year, the US generates this type of waste from both the commercial and consumer aspects. This waste is often generated from fireworks, signal flares and hobby rockets which have been damaged, failed to operate or for other reasons. Due to their chemical properties, these types of devices are extremely dangerous.

While automobile airbag propellants are not as common as munitions and fireworks, they share similar properties which makes them extremely hazardous. Airbag propellants characteristics of reactivity and ignitability are the characteristics which qualify for hazardous waste. When disposed undeployed, leaves these two hazardous characteristics intact. To properly dispose of these items, they must be safely deployed which removes these hazardous characteristics.^[18]

The EPA includes the waste of automobile airbag propellants under the RCRA. In 2018, the EPA issued a final rule on handling of automobile airbag propellants. The "interim final rule"provides an exemption of entities which install and remove airbags. This includes automobile dealerships, salvage yards, automobile repair facilities and collision centers. The handler and transporter are exempt from RCRA, but the airbag waste collection facility is not exempt. Once the airbags have met the collection center, it will then be classified as RCRA hazardous waste and must be disposed or recycled at a RCRA disposal facility.^[18]

Electronic waste, often referred to as "E-Waste" or "E-Scrap," are often thrown away or sent to a recycler. E-Waste continues to end up in landfills across the world. The EPA estimates that in 2009, 2.37 million tons of televisions, computers, cell phones, printers, scanners, and fax machines were discarded by US consumers. Only 25% of these devices were recycled; the remainder ended up in landfills across the US.

E-Waste contains many elements that can be recycled or re-used. Typically speaking, electronics are encased in a plastic or light metal enclosure. Items such as computer boards, wiring, capacitors, and small motor items are common types of E-waste. Of these items, the internal components include iron, gold, palladium, platinum, and copper, all of which are mined from the earth. It requires energy to operate the equipment to mine these metals, which emits greenhouse gases into the atmosphere. Donating e-waste to recycling centers or refurbishing this equipment can reduce the greenhouse gases emitted through the mining process as well as decrease the use of natural resources to ensure future generations will have sufficient access to these resources.

As this issue continued to grow, President Obama established the Interagency Task Force on Electronics Stewardship in November 2010. The overall goal for this task was to develop a national strategy for handling and proper disposal of electronic waste. The task force would work with the White House Council on Environmental Quality (CEQ), EPA, and the US General Services Administration (GSA). The task force released its final product, the National Strategy for Electronics Stewardship report. The report focuses on four goals of the federal government's plan to enhance the management of electronics:^[19]

1.     Incentivizing greener design of electronics

2.     Leading by example

3.     Increasing domestic recycling

4.     Reducing harmful exports of e-waste and building capacity in developing countries.^[19]

E-Waste is not only a problem in the US, but also a global issue. Tackling this issue requires collaboration from multiple agencies across the world. Some agencies involved in this include U.S. EPA, Taiwan Environmental Protection Administration (Taiwan EPA), International E-Waste Management Network (IEMN), and environmental offices from Asia, Latin America, the Caribbean, Africa, and North America.^[20]

Mixed waste is a term that has different definitions based on its context. Most commonly, mixed waste refers to hazardous waste which contains radioactive material. In this context, the management of mixed waste is regulated by the EPA and RCRA and Atomic Energy Act. The hazardous materials content is regulated by RCRA while the radiological component is regulated by the Department of Energy (DOE) and Nuclear Regulatory Commission (NRC).

Mixed waste can also be defined as a type of waste which includes recyclable materials and organic materials.^[21]  Some examples of mixed waste in this context include a combination of broken glassware, floor sweepings, non-repairable household goods, non-recyclable plastic and metal, clothing, and furnishings. Additionally, ashes, soot, and residential renovation waste materials are also included under this definition.^[21]

This type of waste is typically generated from hospitals, physicians' offices, dental practices, blood banks, veterinary offices, and research facilities. This waste has often been contaminated with bodily fluids from humans or animals. Examples of this type of contamination can include blood, vomit, urine, and other bodily fluids. Concerns started to generate when medical waste was appearing on east coast beaches in the 1980s. This forced congress to pass the Medical Waste Tracking Act. This act was only in effect for approximately 3 years after the EPA concluded the "disease-causing medical waste was greatest at the point of generation and naturally tapers off after that point."^[22]

Prior to the Hospital Medical Infectious Waste Incinerator (HMIWI) standard, approximately 90% of the infectious waste was incinerated before 1997. Due to the potential of negatively affect air quality, alternative treatment and disposal technologies for medical waste was developed. These new alternatives include:

• Thermal Treatment, such as microwave technologies
• Steam sterilization, such as autoclaving
• Electropyrolysis
• Chemical mechanical systems ^[22]

There are many issues that surround reporting waste. It is most commonly measured by size or weight, and there is a stark difference between the two. For example, organic waste is much heavier when it is wet, and plastic or glass bottles can have different weights but be the same size.^[23] On a global scale it is difficult to report waste because countries have different definitions of waste and what falls into waste categories, as well as different ways of reporting. Based on incomplete reports from its parties, the Basel Convention estimated 338 million tonnes of waste was generated in 2001.^[24] For the same year, OECD estimated 4 billion tonnes from its member countries.^[25] Despite these inconsistencies, waste reporting is still useful on a small and large scale to determine key causes and locations, and to find ways of preventing, minimizing, recovering, treating, and disposing of waste.

Inappropriately managed waste can attract rodents and insects, which can harbor gastrointestinal parasites, yellow fever, worms, various diseases, and other conditions for humans, and exposure to hazardous wastes, particularly when they are burned, can cause various other diseases including cancers.^[26]Toxic waste materials can contaminate surface water, groundwater, soil, and air, which causes more problems for humans, other species, and ecosystems.^[27] A form of waste disposal involving combustion creates a significant amount of greenhouse gases. When the burned waste contains metals, it can create toxic gases. On the other hand, when the waste contains plastics, the gases produce contain CO_2.^[28] As global warming and CO₂ emissions increase, soil begins to become a larger carbon sink and will become increasingly valuable for plant life.^[29]

Waste management is a significant environmental justice issue. Many of the environmental burdens cited above are more often borne by marginalized groups, such as racial minorities, women, and residents of developing nations. NIMBY (not in my back yard) is the opposition of residents to a proposal for a new development because it is close to them.^[30] However, the need for expansion and siting of waste treatment and disposal facilities is increasing worldwide. There is now a growing market in the transboundary movement of waste, and although most waste that flows between countries goes between developed nations, a significant amount of waste is moved from developed to developing nations.^[31]

The economic costs of managing waste are high, and are often paid for by municipal governments;^[32] money can often be saved with more efficiently designed collection routes, modifying vehicles, and with public education. Environmental policies such as pay as you throw can reduce the cost of management and reduce waste quantities. Waste recovery (that is, recycling, reuse) can curb economic costs because it avoids extracting raw materials and often cuts transportation costs. "Economic assessment of municipal waste management systems – case studies using a combination of life-cycle assessment (LCA) and life-cycle costing (LCC)".^[33] The location of waste treatment and disposal facilities often reduces property values due to noise, dust, pollution, unsightliness, and negative stigma. The informal waste sector consists mostly of waste pickers who scavenge for metals, glass, plastic, textiles, and other materials and then trade them for a profit. This sector can significantly alter or reduce waste in a particular system, but other negative economic effects come with the disease, poverty, exploitation, and abuse of its workers.^[34]

People in developing countries suffer from contaminated water and landfills caused by unlawful government policies that allow first-world countries and companies to transport their trash to their homes and oftentimes near bodies of water. Those same governments do not use any waste trade profits to create ways to manage landfills or clean water sources. Photographer Kevin McElvaney^[35] documents the world's biggest e-waste dump called Agbogbloshie in Accra, Ghana, which used to be a wetland. The young men and children that work in Agbogbloshie smash devices to get to the metals, obtain burns, eye damage, lung and back problems, chronic nausea, debilitating headaches, and respiratory problems and most workers die from cancer in their 20s (McElvaney).^[35] In McElvaney's photos, kids in fields burning refrigerators and computers with blackened hands and trashed clothes and animals, such as cows with open wounds, in the dumpsite. There are piles of waste used as makeshift bridges over lakes, with metals and chemicals just seeping into the water and groundwater that could be linked to homes' water systems. The same unfortunate situation and dumps/landfills can be seen in similar countries that are considered the third world, such as other West African countries and China. Many are advocating for waste management, a stop to the waste trade, the creation of wastewater treatment facilities, and providing a clean and accessible water source. The health of all these people in landfills and water are human necessities/rights that are being taken away.^[35]

This section is an excerpt from Waste management.[edit]

Waste management or waste disposal includes the processes and actions required to manage waste from its inception to its final disposal.^[36] This includes the collection, transport, treatment, and disposal of waste, together with monitoring and regulation of the waste management process and waste-related laws, technologies, and economic mechanisms.

Waste can either be solid, liquid, or gases and each type has different methods of disposal and management. Waste management deals with all types of waste, including industrial, biological, household, municipal, organic, biomedical, radioactive wastes. In some cases, waste can pose a threat to human health.^[37] Health issues are associated with the entire process of waste management. Health issues can also arise indirectly or directly: directly through the handling of solid waste, and indirectly through the consumption of water, soil, and food.^[37] Waste is produced by human activity, for example, the extraction and processing of raw materials.^[38] Waste management is intended to reduce the adverse effects of waste on human health, the environment, planetary resources, and aesthetics.

The aim of waste management is to reduce the dangerous effects of such waste on the environment and human health. A big part of waste management deals with municipal solid waste, which is created by industrial, commercial, and household activity.^[39]

Waste management practices are not the same across countries (developed and developing nations); regions (urban and rural areas), and residential and industrial sectors can all take different approaches.^[40]

Proper management of waste is important for building sustainable and liveable cities, but it remains a challenge for many developing countries and cities. A report found that effective waste management is relatively expensive, usually comprising 20%–50% of municipal budgets. Operating this essential municipal service requires integrated systems that are efficient, sustainable, and socially supported.^[41] A large portion of waste management practices deal with municipal solid waste (MSW) which is the bulk of the waste that is created by household, industrial, and commercial activity.^[42] According to the Intergovernmental Panel on Climate Change (IPCC), municipal solid waste is expected to reach approximately 3.4 Gt by 2050; however, policies and lawmaking can reduce the amount of waste produced in different areas and cities of the world.^[43] Measures of waste management include measures for integrated techno-economic mechanisms^[44] of a circular economy, effective disposal facilities, export and import control^[45][46] and optimal sustainable design of products that are produced.

In the first systematic review of the scientific evidence around global waste, its management, and its impact on human health and life, authors concluded that about a fourth of all the municipal solid terrestrial waste is not collected and an additional fourth is mismanaged after collection, often being burned in open and uncontrolled fires – or close to one billion tons per year when combined. They also found that broad priority areas each lack a "high-quality research base", partly due to the absence of "substantial research funding", which motivated scientists often require.^[47][48] Electronic waste (ewaste) includes discarded computer monitors, motherboards, mobile phones and chargers, compact discs (CDs), headphones, television sets, air conditioners and refrigerators. According to the Global E-waste Monitor 2017, India generates ~ 2 million tonnes (Mte) of e-waste annually and ranks fifth among the e-waste producing countries, after the United States, the People's Republic of China, Japan and Germany.^[49]

Effective 'Waste Management' involves the practice of '7R' - 'R'efuse, 'R'educe', 'R'euse, 'R'epair, 'R'epurpose, 'R'ecycle and 'R'ecover. Amongst these '7R's, the first two ('Refuse' and 'Reduce') relate to the non-creation of waste - by refusing to buy non-essential products and by reducing consumption. The next two ('Reuse' and 'Repair') refer to increasing the usage of the existing product, with or without the substitution of certain parts of the product. 'Repurpose' and 'Recycle' involve maximum usage of the materials used in the product, and 'Recover' is the least preferred and least efficient waste management practice involving the recovery of embedded energy in the waste material. For example, burning the waste to produce heat (and electricity from heat). Certain non-biodegradable products are also dumped away as 'Disposal', and this is not a "waste-'management'" practice.^[50]

Wastewater treatment facilities remove pollutants and contaminants physically and chemically to clean water to be returned to society. The South Gippsland Water Organization breaks down the three steps of waste-water treatment. The primary treatment is to sift through the water to remove large solids to leave oils and small particles in the water. Secondary treatment to dissolve/remove oils, particles, and micro-organisms from the water to be prepared for tertiary treatment to chemically disinfect the water with chlorine or with UV light. “For most industrial applications, a 150,000 GPD capacity WWTS would cost an estimated $500,000 to $1.5 million inclusive of all necessary design, engineering, equipment, installation, and startup”.^[51] With such a simple solution that has been proven to clean water to be reused and is relatively inexpensive, there is no excuse why there should not be a waste-water treatment facility in every country, every state, and every town.

Wastewater treatment allows for water reclamation and disease prevention. Tearfund estimates that in developing countries, .4-1 million people die annually because of diseases caused by mismanaged wastes.^[52]

Energy recovery from waste is using non-recyclable waste materials and extracting from it heat, electricity, or energy through a variety of processes, including combustion, gasification, pyrolyzation, and anaerobic digestion.^[57] This process is referred to as waste-to-energy.

There are several ways to recover energy from waste. Anaerobic digestion is a naturally occurring process of decomposition where organic matter is reduced to a simpler chemical component in the absence of oxygen.^[57] Incineration or direct controlled burning of municipal solid waste reduces waste and makes energy. Secondary recovered fuel is the energy recovery from waste that cannot be reused or recycled from mechanical and biological treatment activities.^[57] Pyrolysis involves heating of waste, with the absence of oxygen, to high temperatures to break down any carbon content into a mixture of gaseous and liquid fuels and solid residue.^[57] Gasification is the conversion of carbon rich material through high temperature with partial oxidation into a gas stream.^[57] Plasma arc heating is the very high heating of municipal solid waste to temperatures ranging from 3,000 to 10,000 °C, where energy is released by an electrical discharge in an inert atmosphere.^[57]

Using waste as fuel can offer important environmental benefits. It can provide a safe and cost-effective option for wastes that would normally have to be dealt with through disposal.^[57] It can help reduce carbon dioxide emissions by diverting energy use from fossil fuels, while also generating energy and using waste as fuel can reduce the methane emissions generated in landfills by averting waste from landfills.^[57]

There is some debate in the classification of certain biomass feedstock as wastes. Crude Tall Oil (CTO), a co-product of the pulp and papermaking process, is defined as a waste or residue in some European countries when in fact it is produced “on purpose” and has significant value add potential in industrial applications. Several companies use CTO to produce fuel,^[58] while the pine chemicals industry maximizes it as a feedstock “producing low-carbon, bio-based chemicals” through cascading use.^[59]

Education and awareness in the area of waste and waste management is increasingly important from a global perspective of resource management. The Talloires Declaration is a declaration for sustainability concerned about the unprecedented scale and speed of environmental pollution and degradation, and the depletion of natural resources. Local, regional, and global air pollution; accumulation and distribution of toxic wastes; destruction and depletion of forests, soil, and water; depletion of the ozone layer and emission of "green house" gases threaten the survival of humans and thousands of other living species, the integrity of the earth and its biodiversity, the security of nations, and the heritage of future generations. Several universities have implemented the Talloires Declaration by establishing environmental management and waste management programs, e.g. the waste management university project. University and vocational education are promoted by various organizations, e.g. WAMITAB and Chartered Institution of Wastes Management.

• 
  Vegetable waste being dumped in a market in Hyderabad
• 
  Weapon scraps
• 
  Agobox; Bio-medical Waste
• 
  Hospital waste
• 
  Waste collected in a tricycle
• 
  Shacks and littering by illegal immigrants in South Africa
• 
  Used cigarette boxes
• 
  Recycling point at the Gdańsk University of Technology
• 
  Containers for selective waste collection at the Gdańsk University of Technology

Wikiquote has quotations related to Waste.

Look up waste or wastefulness in Wiktionary, the free dictionary.

• Media related to Waste at Wikimedia Commons
• Cambio verde: waste-food exchange project in Curitiba, Brazil Archived 2014-03-08 at the Wayback Machine
• Resource Productivity and Waste at the OECD